Zyxel NBG-419N V2 Router Setup - Easy Steps
The ZyXEL NBG-419N router is best for home and small business use. This router offers a maximum speed of
300Mbps with NBG-419N v2, and it allows you to create a separate network for guest users. The router’s default flash memory is used to store its OS. This router supports the following network protocols: IPv4, LAN ports, and WAN ports. You can also connect a wireless and USB printer to the network using this router.
Now, let’s see how to perform the Zyxel NBG-419N V2 router setup for the first time.
Router How To Setup Zyxel NBG-419N V2 Router
Step 1: Physical Setup
First, place your NBG router, modem, and computer closer.
Get an Ethernet cable and, using it, connect the modem to your NBG router.
Using another Ethernet cable, connect your NBG router to your computer.
Connect the NBG router to a power outlet and turn it ON.
It may take up to 30 seconds for your router to complete the initial boot-up process. Step 2: Accessing The Router’s Web Access Page
Open a web browser on the PC that is connected to your NBG router.
In the address bar of the browser, type https://192.168.1.1 and tap Enter on your computer’s keyboard for Zyxel NBG-419N V2 router setup.
Now on using how to setup Zyxel NBG-419N V2 router manual, a screen prompting you to log in will open up.
Note: The default credentials of the ZyXEL NBG-419N V2 router are: Username: blank and Password: 1234.
On the login screen, leave the username field blank and enter 1234 in the Password field.
Click the Login button.
Once you have successfully logged into your router’s web access page, the Welcome screen will open up.
Click the Connect to Internet button on the Welcome screen.
Now, the wizard will detect and display the network type you’re using.
Click the Exit button.
Go to the Advance setup section.
When prompted, log in to your router setup web access page.
Click the Expert mode option on the Home screen.
Make sure that your NBG router’s firmware is up-to-date.
If not, update the firmware by visiting the router’s FTP site.
You have now successfully completed the basic ZyXEL NBG-419N V2 router setup. To know how to configure the Wi-Fi settings of your router, continue reading. Step 3: Configuring Wi-Fi Setup
First, enable the WLAN (press the WLAN switch in the back of the router to enable it) feature on your router.
Now, sign in to your NBG router’s web access page. Click the Configuration menu.
Select the Network option followed by Wireless LAN.
In the Network Name (SSID) field, enter the desired name for your NBG network. Make sure to deselect the Auto Channel Selection option.
Now on following how to setup Zyxel NBG-419N V2 router manual, to set a password for your network. Click the Security Mode option and a mode of your desire from the drop-down menu.
Create a strong password and enter it in the given field.
After entering the password, click the Apply button.
You have successfully completed the Zyxel NBG-419N V2 router setup.