Guidance For Verizon Fios Router Blinking White Globe

Verizon Fios is a home router with a 60% faster speed on 2.4 GHz and a 38% faster speed on 5GHz.

The white light on the router will flash when the router tries to connect to the internet, and it turns to solid white when it is connected. If the white light blinks continuously, carry out the troubleshooting steps mentioned below for Verizon Fios router blinking white globe.

Verizon Fios Router Blinking White Globe
  • Check if your modem is properly connected to the power source.
  • The connection between the Verizon Fios router and the modem must be secure at either end.
  • Turn off both the Verizon Fios router and the modem.
  • Detach the power cable from the router and the electrical outlet.
  • Disconnect the power cable from the modem and the power source.
  • Wait for a while and re-establish the power connection for the router and the modem.
  • Power up both the router and the modem.
  • Detach an Ethernet cable that is connected between the WAN or Internet port of the router and the Ethernet port of the modem.
  • Leave it for a minute and again, establish a connection between them.
  • Check if the white link blinking issue on the router has been resolved.
  • If not, check if the Ethernet cable is damaged.
  • A damaged Ethernet cable might also be the reason behind the issue.
  • Try to replace the damaged Ethernet cable with a new one.
  • Also, the Power LED on the modem must stay lit.
  • Try to connect the modem’s power cord properly to the power source.
  • By using these steps we can resolve the Verizon Fios router blinking white globe.
  • If the issue persists, get assistance from our technical support member in resolving the white light blinking problem on the Verizon Fios router. The Call button is available on this web page.