QUICK UBIQUITI ROUTER SETUP GUIDE
Process Ubiquiti router setup using the procedure that is stated below and connect any device to it.
Select Wireless Settings under Advanced.
- How to Setup Ubiquiti Router
HOW TO SETUP UBIQUITI ROUTER
Connect the Power cord between the router and the power supply.
So How to Setup Ubiquiti Router, Attach the Ethernet cable between the computer and the Ethernet port of the router.
Next, you have to set a static IP Address on your system. To do so, go to Settings and select the Network & Internet option.
Choose the Status option followed by the Change Adapter Options option.
Select the Internet Protocol Version 4(TCP-IPv4) option under Ethernet Adapter Properties.
Click the Properties option. Enter the static IP address manually and tap the OK button.
Open a default browser and key in the IP Address of the Ubiquiti router in the address bar.
In the Login window, enter the correct credentials in the Username and Password fields.
Ensure that the Ubiquiti router is running on the latest version. Download and install any upgrades that are available.
- Router Setup option.
Run the Wizard available under the Wizards tab. Select the Basic
Modify any router settings you want on the next page and save it.
The ubiquiti router setup process is now complete.
UBIQUITI ROUTER MANUAL
The Ubiquiti router manual contains all the information starting from how to setup ubiquiti router to the troubleshooting issues. The Ubiquiti router is easy to use, configure, and perform the parental controls. Usually, the user manual is provided with the router package during the first time purchase. You can also get the user manual of the Ubiquiti router from the official site. The user manual is available in the PDF format. So, ensure that your system has the PDF reader application installed.
UBIQUITI ROUTER CONFIGURATION
To configure the Ubiquiti router, perform the procedures discussed below.
First, log into the Ubiquiti router account.
Make sure to turn on your router and connect the computer to the router using an Ethernet cable during the login process for Ubiquiti Router Configuration.
Go to the official site of the Ubiquiti router using the 192.168.1.1 IP address.
Enter the credentials and click the Login button.
Now the router’s configuration page appears.
The next step is to upgrade the ubiquiti router setup firmware.
Download the EdgeRouter ERLite-3/ERLite-3/ERPoe-5 Firmware v1.8.0 from the official page of Ubiquiti.
Now, go back to the router’s configuration page and click the System option.
- Firmware Version --> Upgrade System Image --> Upload a file for Ubiquiti Router Configuration.
Select the Download Firmware file and wait for the upgrade process to complete.
Once the how to setup ubiquiti router process completes, restart the Ubiquiti router.
Now your Ubiquiti router is ready for the configuration.
Log into your Ubiquiti router account. Click the WAN+2LAN2 option and enter the required credentials in the given field for Ubiquiti Router Configuration.
- Apply --> Apply Changes --> Reboot --> Yes I’m Sure.
Connect your Ubiquiti router to the network and start creating MAC to IP Binding.
After that, enable the PoE feature and create a rule that prevents other devices from accessing your internet connection.
- System option--> Back Up Config --> Download.
At last, make sure to back up the configuration details by clicking the
UBIQUITI ROUTER PARENTAL CONTROLS
To enable the Parental Controls option on your Ubiquiti router, follow the instructions given below.
The easiest way is setting the DNS to Open DNS Family Shield.
Log into your Ubiquiti router account and go to the Settings menu for ubiquiti router parental controls.
Select the Firewall option followed by Groups and enter the 184.108.40.206 and 220.127.116.11 IP address as the DNS Server group.
- ubiquiti router parental controls.
Set the port group to 53. Create a rule in the LAN IN field to config
Click the Apply button followed by Save. You can contact our technical experts for any assistance in ubiquiti router setup or resolving issues related to the router.
UBIQUITI ROUTER FIRMWARE UPDATE
Proceed with the following instructions to upgrade the firmware. To automatically update the ubiquiti router setup firmware using UNMS, proceed with the steps below.
You can update the firmware using the UNMS, Web UI, or the Command line method for ubiquiti router firmware update.
Open the Firmware Manager window to check for any firmware updates.
- Devices ->Actions -> Upgrade devices firmware to update the appropriate router.
Choose the Edge router device which you want to upgrade and select the Set Firmware Versions to the Latest option to update the chosen router.
- ubiquiti router firmware update completes. The router will reboot automatically.
Wait till the
Do the following steps to update the firmware using the Web UI for ubiquiti router firmware update.
Download the EdgeOS firmware from the official page of the Edge Router.
- System -> Upgrade System Image -> Upload a file, and browse the file to be uploaded.
Wait till the firmware update completes.
If prompted, reboot the device to activate the updated firmware.
You can also update the firmware using the command line.
Make sure there is enough space to update the firmware.
You can remove the backup system image to increase the storage space for upgrading the firmware.
Use the appropriate command line in the Command window to upgrade the firmware.
Once the update completes, make sure to activate the new firmware.
If you need to activate a new firmware image, follow the steps displayed on the screen to reboot your device.
After rebooting your ubiquiti router setup device, enter the username and password to ensure that you have updated the latest version of the firmware.
UBIQUITI ROUTER DEFAULT USERNAME AND PASSWORD
The default username and password for the Ubiquiti router is ubnt. You can find the default username and password in two ways.
Locate the username and password on the label attached to the backside of your Ubiquiti router.
You can also find the default username and password in the documentation attached with the router.
You can change the Ubiquiti router’s password at any time.
If you have changed the router’s default password, and forgotten it, do the following steps to reset the Ubiquiti router. After resetting the router, you can log into the router web setup page using the default username and password.
Hold the router’s reset button for a few seconds until the LED stops glowing. Use a paper clip or similar pointed object to press the reset button.
Wait till the process completes and start your router again.
Open the default web browser like Chrome or Firefox to setup follow how to setup ubiquiti router guide.
Key in the router’s IP address in the address field of your browser. Type the default username and password for authentication in the required fields.
HOW TO RESET UBIQUITI ROUTER
You can reset the Ubiquiti router to the default factory settings in three ways.
Open the ubiquiti router setup Network main page and sign into the nifi Controller to reset ubiquiti router.
Select the UAP (UniFi Access Point) which you need to eset when the Devices window appears on the screen.
Now, the Properties window will appear on the screen. lick the Configuration tab, select the Manage Device, and then tap the Forget button.
The Ubiquiti router starts to reset automatically. All he configuration and history & data of your device will be deleted.
The default factory settings will be restored.
You can also access the UAP via SSH, type the ppropriate command in the command window, and click the Enter button to reset ubiquiti router.
The default factory settings will be restored on the outer automatically.
Make sure not to disconnect the UAP from the power ource during the reset process. If so, it will create some problem.