TP Link Router IP
The TP-Link router is a portable wireless router which supports RJ-45 cables, and it can be used with a wide range of broadband modems. The TP-Link router’s IP address is the address which the user uses to log into its Embedded Web Server page to configure it. The TP-Link router’s IP address is typically mentioned on its label. The user can also find it in the TP-Link router’s user manual. The official manufacturer’s support site also provides the IP address details for each TP-Link router model.
TP-Link Router Login IP
The TP-Link router’s Embedded Web Server page can be accessed by entering its IP address in the computer’s web browser. Here’s how a user can log into the TP-Link router.
Depending on the TP-Link router model, its IP address can be
This TP-Link router information can also be found on the TP-Link router’s label or user manual.
Locate the TP-Link router’s IP address and type it in the web browser’s address bar. Press Enter.
Now, the TP-Link router login prompt appears. You will need to key in the TP-Link device’s username and password. Typically, the TP-Link router’s username and password are ‘admin’ and ‘admin’ or leave the username field blank and type ‘admin’ as the password.
After keying in these TP-Link router details, the EWS page will be opened. This is where the user can change the TP-Link router’s username, password, check the router status, and so on.
After making changes on the TP-Link router’s EWS page, click Save to save these changes and use this data to log into the TP-Link device.
Block ip address TP-Link router
Proceed with the following instructions to block the IP address of your TP-Link router.
First, you need to connect your TP-Link router to the computer. On your computer, open any web browser such as Google Chrome or Internet Explorer.
- 192.168.2.1 or 192.168.1.1 or 192.168.0.1 in the address bar. Tap the Enter Key on your keyboard.
Enter the valid username and password in the appropriate fields and then click the Log In button to sign in to the TP-Link router web interface page.
Note: The default username and password of the TP-Link router are admin.
- Advanced routing Static Routing List Add Add New.
Select the Advanced tab at the top-left corner of the screen and click the Network option on the screen. Navigate to
Enter the details like network destination, subnet mask, IP address of your TP-Link router, interface, description, and status of your TP-Link router in the required fields.
When the next screen displays, select Save. If you want to block any other IP address of your TP-Link router, perform the steps mentioned above again.
Now, the specified IP address of your TP-Link router is blocked. Close the current window and then launch the Command Prompt window on the screen.
Type ‘ping 188.8.131.52’ and type the blocked IP address of your TP-Link router. Once you get the ‘Timed Out’ message or ‘Destination Host Unreachable’ message on the Command Prompt window, turn your TP-Link router off.
Remove the power cord from the TP-Link router and the power source. After 30 seconds, reconnect the power cord to the TP-Link router and the power socket. Make sure the TP-Link router is turned on after power cycling it.
How to find ip address of the TP-Link router
The steps to find the IP address of the TP-Link router may vary depending on the Operating System of your device. Follow the steps mentioned below to know how to find the IP address of your TP-Link router on Windows.
Select the Windows icon at the bottom-left corner of the screen.
Type ‘control panel’ in the search bar and then select it from the displayed result.
Select the Category option at the top-right corner of the screen and then click the ‘View network status and tasks’ option under the Network and Internet section on the main panel of the screen.
Check whether your network ID is displayed next to Connections and then click it.
When the Wi-Fi Status window opens, click the Details button.
You have to check the IP address of your TP-Link router next to IPv4 Default Gateway.
Select the Close button at the bottom of the screen after you find the IP address of your TP-Link router.
How to configure static ip in router TP-Link
Make sure to establish a wired network connection between your TP-Link router and the computer.
Launch your favorite web browser and then type 192.168.22.1 in the address bar to open the TP-Link router interface page.
Now, enter the username and password of your TP-Link router.
When you get the TP-Link router web page, check the WAN IP under the Router section.
Select the Setup tab at the top-left corner of the screen and then follow the steps mentioned below to configure the Static IP address of your TP-Link router.
Select your WAN connection type as Static IP from the Connection Type drop-down menu.
Enter the WAN IP address, subnet mask, and gateway details.
- Save Apply Settings.After configuring the static IP address of your TP-Link router, select