How To Do Tp-Link Archer Ax11000 Router Setup?

Tp-Link Archer Ax11000 Router Setup

TP-Link Archer AX11000 is a Next-Gen Tri-Band gaming router. It has a Wi-Fi speed of up to 10756 Mbps and makes less congestion for gaming. On this webpage, you can learn how to perform TP-Link Archer AX11000 router setup using an Android device.

What’s In The Box:

  • TP-Link Archer AX11000 Router.
  • Power Adapter.
  • Quick Start Guide.
Tp-Link Archer Ax11000 Tri-Band Router Setup

Basic Router Setup:

  • Open the box and take out the TP-Link router and other box content.
  • Place the router horizontally and raise all the antennas vertically.
  • Turn OFF your Internet modem and remove the backup battery if it has one.
  • Now plug an Ethernet cable into the rear end of the modem and the other end to the router’s WAN port.
  • Connect the power adapter to the electrical socket and the TP-Link router.
  • Press the router power button and turn it ON.
  • Connect the power cable to your modem and turn it ON.
  • Make sure the wired connection is made correctly.
  • The router LED flashes for a few seconds; wait until the router LED is solid.

Continiue reading the given below steps to know more on Tp-Link Archer Ax11000 Router Setup.

Connect The Router To Android Mobile:

  • On your Android mobile phone, select Settings > Wi-Fi Settings.
  • Under Wi-Fi settings, tap the toggle button and turn ON Wi-Fi.
  • Navigate to Google Play Store.
  • In the search bar, type Tether app and tap search.
Setup Tp-Link Archer Ax11000 Tri-Band Router
  • Select the Tether app from the search list and tap Install.
  • When the app is installed on the Android mobile, open the Tether app.
  • On the top right corner, tap on the ‘+’ button.
Tp-Link Archer Ax11000 Gaming Router Setup
  • Tap the TP-Link Archer AX11000 router name on the Setup Device screen.
  • On the Get Started screen, tap I’ve already connected my hardware.
Setup Tp-Link Archer Ax11000 Gaming Router
  • Check if the LED light on the router is solid ON and then tap LED is solid on.
  • Now the app searches for the nearby router; once detected, tap the router name on the screen.
  • Create a new password, type the same password in the text field, and tap Create.
Tp-Link Archer Ax11000 Tri-Band Gaming Router Setup
  • Tap the Dynamic IP radio button on the Select your connection type screen and tap Auto Detect.
  • Once the Detected Connection Type: Dynamic IP message prompts on the screen, tap Next.
Setup Tp-Link Archer Ax11000 Tri-Band Gaming Router
  • On the next screen, tap the Do Not Change Mac Address (Recommended) radio button followed by Next.
  • Now customize your wireless network name and make sure the 2.4GHz Wireless Network toggle button is ON.
  • Type the SSID in the Network Name (SSID) text field, type the password in the Password text field, and tap Next or Use the default wireless settings followed by Next.
Tp-Link Archer Ax11000 Next-Gen Router Setup
  • The default SSID name and password automatically loads in the respective field.
  • On the 5GHz network screen, toggle the 5GHz-1 Wireless Network button.
  • Enter the SSID and password in the respected files and tap Next.
  • Tap Apply on the Confirm and apply your settings screen. Note down all the SSID names and passwords for future use.
  • Wait until the settings are complete and touch Finish.
  • Under Connect Your Network screen, select 2.5GHz or 5GHz and tap Continue.
  • If the Tether app prompts you to join the TP-Link router, tap Join.

Finally, the TP-Link Archer AX11000 router setup is completed successfully using the Android mobile. For any Tp-Link router issues, Call our experts and get instant solution.