How To Perform Tenda Fh304 Router Setup?
- How To Setup Tenda FH304 Router?
The Tenda FH304 router was released in 2014 and it is powered by Broadcom BCM5357C0 @ 300 MHz chipset, 16 MB RAM, and 2 MB flash. Here, you’ll get to know the procedure for the Tenda FH304 router setup.
Connect another Ethernet cable between the LAN port of the router and your computer.
Plug in the power adapter to the router. Now, turn on your modem, router, and computer in the same sequence.
Configure The Computer
Right-click on the Network icon at the lower right corner.
Click Open Network and Sharing Center.
Click Change adapter settings.
Right-click on Local Area Connection and then choose Properties.
Select Internet Protocol Version 4 and then click Properties.
Choose Obtain an IP address automatically.
Choose Obtain DNS server address automatically.
Configure The Router
Open a browser on your computer.
Type in the default IP address of the router (192.168.0.1) in the address bar and then press Enter.
Enter the login credentials. The default user name is admin and the default login password is admin. Then press OK.
Under Internet Connection Setup, click the type of connection.
Click on Advanced and go to Internet Connection setup.Choose the Internet Connection type as static IP.
Enter the information provided by your ISP. If you don't know about it, consult your ISP.
Check the connection status. If it shows connected, then you can use your internet.
Click the Wireless tab.
Change the primary SSID as you prefer.
Select the wireless security for your wireless network.
Change the security settings as you prefer and click OK.
Now, you have completed your Tenda FH304 router setup.