Sky Router Not Working After Power Cut
One of the common issues with the Sky router is the connection failure on the router after a power supply cut. Continue reading to find out why the Sky router is not working after a power cut and the possible solutions to fix the Sky router not working after power cut problem.
- Sky Router Stops Working After Power Cut
The sudden surge in the power supply after a power cut damages the router circuits and eventually makes it unusable.
When there is a power cut, disconnect the router from the electrical socket and leave it as such.
Wait till the power supply is restored, then plug the router’s power cable to the electrical socket to ensure Sky router not working after power cut problem is fixed.
And carefully turn on the router and see if the router turns on.
The Wi-Fi settings of the router may have changed, so connect the router to your computer using a wired network cable.
Open the router’s login page on the web browser by entering the router’s IP address.
Enter the login credentials of your router. If that is also not working, try to log in using the default username and password.
Navigate to the wireless network settings menu of the router and check if the settings are correct.
In case the settings have changed, then modify the Wi-Fi network settings as required.
When the above solutions do not help to solve the problem, press and hold the reset button on the router for 7 seconds.
- router setup page.
After the reset is complete, connect the router and your computer to access the
Since all the settings will be changed to the default factory settings due to the reset, make the basic and advanced settings again.
Then verify if the router is working properly now.
It is better to contact the service team for the support to solve Sky router not working after power cut, by whom the exact problem can be identified and solved.