QUICK GUIDE TO RESET CISCO ROUTER
If you cannot log into the Cisco router account using your credentials, you need to reset it. After rebooting the Cisco router, you need to configure the settings again. Reset Cisco router will delete all the information from it. You can reset the router either using the Reset button or using the Command.
HOW TO RESET CISCO ROUTER
Proceed with the following instructions to reset the Cisco router using the Reset button.
RESET ROUTER PASSWORD CISCO
Follow the instructions below to reset the Cisco router password.
Hold the Reset button for 5 seconds to reset the password on the Cisco router.
Launch the Command Prompt window and then enter the command type ipconfig.
Check the IP address of the Cisco router on the Command Prompt window.
- reset router password Cisco.
Launch the web browser like Google Chrome, Firefox, or another web browser to
Enter the IP address of the Cisco router in the address bar and then use the default username and password in the specified field to log into the Cisco router account.
FACTORY RESET CISCO ROUTER
Using the reset button,
- router setup and the electrical socket.
Turn off the Cisco router. Make sure to connect the power cord between the
Search for the reset button and try to press & hold it. Simultaneously, turn on the router.
Now, release the reset button after 10 seconds.
The router booting will take place for 5 to 10 minutes. After that, check the lights on the router. Then, turn off the router.
The router is now reset.
Using router commands,
Power off the router. Remove and replug the power cord to the router. Connect the other terminal of the router to the power socket.
Using a console cable, connect the computer to the console port of the router for reset Cisco router.
Now, switch on the router and wait for 10 to 15 minutes for the booting process to complete.
Once the lights start to blink, the router has finished booting.
Now, make use of the terminal emulator program to open the routers command-line interface.
Type the commands on the router’s command-line interface to delete the existing configuration.
Wait for some time until the files are completely deleted A prompt message from the command-line interface appears.
Exit the terminal emulator window and turn off the router
FACTORY RESET CISCO 2900 ROUTER
Check if the router is powered off.
After 10 to 20 seconds, power off the router and make sure to send a Break character for the terminal.
For Windows, right-click PuTTY and choose Special Command followed by Break.
For Mac OS, On the terminal, press Ctrl+A, and then press Ctrl +B.
Immediately a prompt will appear for reset Cisco router.
Skipping the existing configuration, enter the command confreg 0x2142 for factory reset Cisco 2900 router.
Now, enter the command to restart the router.
After restarting, enter ’no’ for the initial configuration.
Next, make sure to press Return to go to the prompt screen.
- factory reset Cisco 2900 router.
In the prompt dialog box, enter the following commands to
To go to the privileged mode, type en.
To erase a comment, type erase.
To confirm an erase command, type y.
For the existing cisco router to process the existing config on Startup during factory reset Cisco 2900 router, type config-register 0X2102 Next, type end.
Turn off the router and turn it on again.
The router has successfully completed the factory reset.
RESET CISCO 1900 ROUTER FACTORY DEFAULT
Here are the guidelines to reset the Cisco 1900 router.
Power up the Cisco 1900 router and wait until the device initializes
The Reset button is located on the rear side of the router. Press this button with a needle-like object and hold it for about 15 seconds.
When you release this button, reset is initiated on the Cisco 1900 router. This takes about 8 minutes to complete. The Cisco 1900 router’s LEDs blink, and finally, the LEDs glow steadily.
Power off the Cisco 1900 router and then power it on after a few minutes.
RESET CISCO 871 ROUTER FACTORY DEFAULT
Connect the Cisco 871 router to a console such as PuTTY on a computer and access its command-line interface.
Power off the Cisco 871 router and then send a break character via the terminal to reset Cisco 871 router factory default.
If you use PuTTY on a Windows computer, press the Ctrl key and the break key at the same time for reset Cisco router.
If you are using a Mac computer to access the terminal, press the Ctrl and A keys first simultaneously. Then, press the Ctrl and B keys at the same time.
On the command prompt screen, type 'confreg0x2142' without quotes and press Enter. Type 'reset' without quotes and then press Enter.
- reset Cisco 871 router factory default.
Now, the Cisco 871 router will restart. Type 'no' without quotes if the initial configuration prompt is displayed. Press Enter to
Press the Enter key to go to the main prompt screen. Type 'en' without quotes and then type 'write erase' without quotes.
Type 'y' without quotes and then type 'configure t' without quotes.
Type' config-register 0x2102' without quotes and then type 'end' without quotes. Now, the Cisco 871 router will be set to factory default. Power off the Cisco router and wait for a few minutes before powering it on.
RESET CISCO E1200 ROUTER PASSWORD
Make sure that you know the administrator credentials to log in to the web management page of the Cisco router.
In the Authentication window, enter the username and password correctly.
Once you log in, go to the Wireless tab and select the Wireless Security option to reset Cisco e1200 router password.
Choose the Security Mode from the drop-down list available under it reset Cisco router password.
In the textbox provided for Passphrase, you have to enter the new cisco router password.
Click the Save Settings button to reset Cisco e1200 router password. The password is now reset.
RESET CISCO ROUTER 2800 FACTORY DEFAULT
Ensure that the Cisco 2800 router is turned on in the first step.
Next, turn the router to its backside and find the Reset button.
Press the Reset button using a pin or paperclip, and hold it for 15 seconds.
Wait till the Cisco router reset procedure is complete. It might take at least 8 minutes process to complete.
Once the procedure is over, the lights available on the front panel of the router will become steady.
Power off the router and turn it on again. Configure the settings to start using the Cisco router.
CISCO LINKSYS E900 ROUTER PASSWORD RESET
Open the default web browser on your computer and key in the IP Address of the Cisco router.
Specify the user ID and password in the Authentication Required window.
Click the Sign in button, and you will be directed to the web utility page of the router.
Navigate to the Wireless tab and choose the Basic Wireless Setup option present under it reset router password Cisco.
Highlight the checkbox near the Manual option. Mention the name of the network in the Network Name field.
Save the router settings. Select the Wireless Security option and choose the WPA2 Personal option from the Security Mode drop-down menu.
Enter the Password in the textbox provided near the Passphrase field after deleting the old password.
Tap the Save Settings button, and the reset Cisco router password will be reset.