How To Use Remote Access Sky Router?

remote access sky router

Remote access sky router gives access to change the router settings, check the connected users, and restrict or block the connected devices.

To remote access, follow the below-mentioned steps.

  • Turn on your Sky Hub (Wi-Fi router) and connect it to your local computer.
  • Make sure that you have connected the remote access sky router and the computer using a standard Ethernet cable.
  • On your PC, open the default browser and enter the Sky router's IP address in the URL field.
  • Now, the Sky router's login portal will open in the browser window.
  • You can identify the IP address in the label attached to the backside of the Sky router.
  • Otherwise, you can identify it using the "ipconfig" command in the Command Prompt window (if you are used the Windows OS).
  • In the Sky router's login portal, enter your username and password to access the administrative interface or router settings page.
  • If you have not changed the default username and password, enter "admin" in the Username field and "sky" in the Password field.
  • On the router's settings page, click the Advanced tab and select Router Management.
  • Select the "Turn Remote Management On" checkbox.
  • Under Remote Management Address, note down the IP address to access your Sky router remotely from another device.
  • Under Allow Remote Access By, click the Everyone radio button to allow access to every user connecting to your remote management address.
  • If you wish to specify a single computer to access your Sky router remotely, click the Only This Computer radio button.
  • Next, enter the IP address of the computer in the required field.
  • If you are specifying few users to remote access sky router, click the IP Address Range radio button and enter the IP address range in the From and To fields.
  • Once you have finished the setup, click the Apply button to save the settings.
  • Next, open the default browser on the device that you wish to access the sky router from.
  • Enter the remote management address in the URL field to access your Sky router.
  • If you aren't able to access your remote access sky router remotely, click the Call button available on this screen to contact our technical support team.