Netis Wf2411e Router Setup - Quick Steps

Hardware Connection

• If your modem is turned on, turn it off.
• Connect the Ethernet cable’s one end to the WAN port of your Netis router and its other end to the modem's LAN port.
• Take another Ethernet cable and plug its one end into the LAN port of the router.
• Connect the Ethernet cable’s other end to your computer’s Ethernet port.
• Power up the modem.
• Connect the power adapter between the router’s PWR jack and an electrical socket.
• Wait until the router turns on automatically.
• Now, you have finished the Netis WF2710 router setup hardware.

Configure The Router Settings Via The Web Management Page

First, you have to set the IP address on your computer as Automatic or DHCP. To do this, perform the instructions given here.

On Windows 8, 7, or Vista:

• Launch the Control Panel screen and click the Network and Internet option. Select the Network and Sharing Center option.
• Choose the Change adapter settings or Manage network connections option.
• Right-click the Local Area Connection option and click the Properties option.
• Now, locate the Internet Protocol Version 4 (TCP/IPv4) option and double-click it. Select the options given below.
• Obtain an IP address automatically
• Obtain DNS server address automatically
• To save these settings, click the OK button.
• Go to step 2 to continue with the Netis WF2710 router setup.

On Windows XP or 2000

• Select the Control Panel option from the Start menu.
• Click the Network and Internet Connections option followed by the Network Connections option.
• Once you right-click the Local Area Connection option, choose the Properties option to do Netis WF2710 router setup.
• Find the Internet Protocol (TCP/IP) option and double-click it.

• Select options below.
• Obtain an IP address automatically
• Obtain DNS server address automatically
• To apply the altered settings, select the OK option and proceed with the next step of Netis router setup.

• On your Mac computer’s home screen, click the Apple logo at the top.
• Select the System Preferences option and click the Network icon.
• In the left panel, click the Ethernet tab followed by the Advanced option.
• Navigate to the TCP/IP tab, go to the Configure IPv4 drop-down menu, and choose the Using DHCP option.
• Once you select the OK option, click the Apply button.



• Launch the Internet Explorer browser or any other browser on your computer.
• In the address column, type 192.168.1.1. Press the Enter key on the keyboard.



• Choose your desired language for Netis WF2710 router setup.
• Navigate to the Internet Connection Type field.
• Select the radio button beside the DHCP, Static IP, PPPoE, or Other option.

DHCP

• If you select the DHCP option, your router will detect the IP parameters automatically.
• Static IP
• If you choose the Static IP option, you have to enter the IP address, subnet mask, default gateway, and DNS servers provided by your Internet Service Provider.

PPPoE

• If you have chosen the PPPoE option, you have to type the username and password provided by your Internet Service Provider (ISP).
• Go to the Wireless Setup section.
• Type your network name in the 2.4G SSID field.
• In the Security field, select the Enable radio button.
• Enter your network key in the Password field.
• Also, fill the 5G SSID, Security, and Password fields.
• Click the Save button to finish the Netis WF2710 router setup.