Connect the modem to the Netgear router by using the ethernet cable. Attach the ethernet cable to the Netgear router and the LAN port of your computer. Power off your PC, modem, router, and then, turn them on again. Wait until all these devices initialize.
So how to setup netgear router, Double-click the browser icon on your desktop and wait until the homepage loads. Go to the Address bar and type the line, 'http:/192.168.0.1' or 'http://192.168.1.1' without quotes and press Enter.
Now, you will see a prompt requesting you to key in your Netgear router. By default, the Netgear device username is admin, and its password is password. Note that these words are case sensitive. So enter them exactly as mentioned. However, if you have changed the Netgear device's password, make sure you type that instead.
The Netgear main screen will be displayed. Click on the netgear router Setup Wizard button located on the left-hand side. Click the Yes radio button on the right-hand side and click Next.
If the type of connection used is static, the corresponding message will be displayed. If it is dynamic, the dynamic IP detected message will be shown. Click Next.
Go to the panel on the left-hand side and click on Router Status under Maintenance. Check whether a valid IP address is displayed. If it is an IP address comprising only zeroes, it is invalid. If it is a valid IP address, it will appear something like 184.108.40.206.
NETGEAR ROUTER LOGIN
Follow these guidelines for netgear router login.
Open any browser on your PC such as Mozilla Firefox, Internet Explorer, Google Chrome by double-clicking its icon on the desktop.
Move your cursor over the web address bar and click on it. Now, enter 'http://www.routerlogin.net' or 'http://routerlogin.com' in the search field. Press the Enter key.
Alternatively, you can key in your Netgear router's IP address such as 'http://192.168.0.1' or 'http://192.168.1.1' (without quotes) and press Enter for netgear router login.
A message stating that the connection is not secure may appear. Make sure the Netgear device's address that you've typed is correct and click OK for netgear router login.
Now, the Netgear router setup’s login page will be displayed. Key in your Netgear router user name and password. The default Netgear user name and password are admin and password, respectively. Note that these details are case-sensitive.
Click the OK button or Log In button to view the BASIC home screen to netgear router login.
RESET NETGEAR ROUTER
The reset operation on a Netgear router involves the deletion of personalized settings and security settings. When you can't find the Netgear device password, a factory reset may be performed to regain access to the device. The following guidelines will help you reset Netgear router.
Make sure that the Netgear router's Power LED is on to reset netgear router.
Place the Netgear router on its side and look at the rear surface of the device. You will find either the Restore Factory Settings or Reset button.
Use a thin cylindrical tool such as a safety pin, sewing needle, or paper clip to press and hold the 'Reset' button for about seven seconds to reset netgear router.
Release the Reset button, and the Netgear router reset will be initiated. You can now use the default user name and password which are admin and password respectively to log into your Netgear router.
NETGEAR ROUTER FIRMWARE UPDATE
Open a browser from the computer that is linked to your Netgear router.
Type www.routerlogin.net in the search box and then click on the Enter button.
The Login dialog box of your Netgear wireless access point opens on the PC screen.
Enter the Netgear router setup's username and the password.
Tap the Advanced tab and click on the Settings or Administration option, and then choose Administration again.
Choose either the Router Update or Firmware Update option and then tap the Check button.
The Netgear wireless access point will search for the latest update for the firmware.
If a recent firmware update is available, then select the Yes button and then wait for the upgradation process to finish.
HOW TO CHANGE NETGEAR ROUTER PASSWORD
Open a browser and type the Netgear router setup’s default IP address, and then provide the login details to to change Netgear router password.
Go to the Basic Home page of the Netgear router and choose the Wireless button.
Type a new Service Set Identifier or network name if needed to to change Netgear router password.
You must type the new password in the Password area.
The changes get saved after you click on the Save button to to change Netgear router password.
ACCESS NETGEAR ROUTER
The easy steps on how to access your Netgear wireless access point are given below.
From your personal computer or mobile phone, start any browser such as Google Chrome, Mozilla Firefox, or Safari and then go to the official support site of the Netgear wireless router.
Else, type the appropriate IP address of your Netgear network router and then press the Enter button, else click on the Search option.
The browser might alert you, saying that the connection is not safe.
Check the IP address you have entered, and then go to the Login pop-up window of your Netgear wireless access point.
Enter the right username and the password, and then select the OK or Log In option.
Now you can start accessing the web-based setup page of the Netgear router.
NETGEAR ROUTER IP ADDRESS
Every Netgear router has a default IP address that can be used to access the web utility page.
Netgear usually uses only two IP addresses, namely: 192.168.1.1 and 192.168.0.1.
Key in any one of the addresses to enter the Login page.
You can find the IP address in the white label that is stuck at the back side of the Netgear router.
If it not clear, then find the document that came along with the router during its purchase.
The default IP Address will be printed in the document.
Open any frequently used browser on your system and key in the Netgear default IP address in the search bar.
Tap the Enter button, and you will be directed to the login page.
Enter the correct credentials to sign into the Web Configuration page of the Netgear router setup.
NETGEAR N300 WIFI ROUTER SETUP
Follow how to setup netgear router instructions given here to perform the setup process on your Netgear router.
Attach the Ethernet cable to the Internet Port available on the router and your computer for netgear n300 wifi router setup.
Restart your router, computer, and modem. Wait until the bootup process is over to proceed netgear n300 wifi router setup.
Open the default browser and enter the IP address of your Netgear router. Press the Enter key.
In the log in screen, enter the correct credentials and tap the Sign in option for netgear n300 wifi router setup.
The default username and password to log in to your router’s web management can be found on the router or in the documentation that came with it.
Tap the Netgear router Setup Wizard option. Highlight the checkbox near the Yes option and click the Next button.
The Internet Connection type will be detected as Dynamic IP. Choose the Next option to save the settings for netgear n300 wifi router setup.
NETGEAR AC1750 SMART WIFI ROUTER SETUP
To set up your Netgear AC1750 Smart Wi-Fi router, perform the how to setup netgear router steps as given below.
Get an Ethernet cable from a trusted retail store for netgear ac1750 smart wifi router setup.
Connect the router Netgear AC1750 Smart Wi-Fi router to the modem using the Ethernet cable.
Get another Ethernet cable to connect the Netgear router to the computer.
Plug in the power cable to the wall outlet for netgear ac1750 smart wifi router setup.
Turn on your modem and then press the On/Off button on the router panel to switch it On.
Wait for the router screen to change into solid green.
Now, on your computer, open a web browser, and type the 192.168.1.1 IP address in the search bar.
Enter the credentials in the required field and click the Login button.