How To Fix Netgear Router Not Sending A Wireless Signal?
- Router Not Sending A Wireless Signal
The Netgear routers are one of the finest to transmit data at a good speed and have a unique coverage area. But, certain minor issues on the router could be causing the wireless signal issue. We have a couple of troubleshooting methods that could help you to fix Netgear router not sending a wireless signal issues.
Try connecting your computer to the router directly with the help of an Ethernet cable instead of the wireless connection.
Try rebooting the computer to find the connection back, because a reboot can solve many wireless problems.
- Netgear router and then see if you are relieved from the signal issue.
Sometimes, positioning the router properly will help you fix the signal issues.
Ensure that the router is placed in a central location.
Make sure there are no obstacles between the Netgear router and the computer.
Make sure to remove other electronic devices like the microwave, cordless phones, and other machines that have the same waves --- 2.4 GHz or 5 GHz.
Check for the signal strength on your router:
Open the default browser on your computer.
Enter the Netgear router IP address in the address bar and press the Enter button.
You will now have to type the default login credentials:
Once you are on the router setup page, click the Advanced tab and fix netgear router not sending a wireless signal.
On the left pane of the Advanced tab, locate and click the Wireless Settings option.
In the 2.4GHz section, click the Transmit Power Control option and set the value to 100%.
In the 5GHz section, click the Transmit Power Control option and set the value to 100%.
If You Cannot Find Your Netgear Ssid In The List
Check if the Wi-Fi light on your Netgear router is lit.
If you still cannot find the connection, your SSID broadcast signal could be disabled.
Follow the steps to enable the broadcast signal on your router.
Open the default browser, enter the Netgear's IP address, and press the Enter button.
You will now have to enter the default login credentials to gain access to the Netgear router page.
Navigate to the Wireless settings section.
You will see two options: Network name and Security.
Next to the Network Name field, click the checkbox to disable the option Hide SSID.
Save the changes and close the router configuration window.
- netgear router not sending a wireless signal, then you can reset the router to factory defaults. But be aware of the fact that this could delete all your network settings.
Even if you are not able to fix