Netgear Nighthawk X10 Ad7200 Router Setup

In this section we will explain about Netgear Nighthawk X10 Ad7200 Router Setup. Netgear Nighthawk X10 Wireless AD7200 router supports the MIMO technology, which channels operations up to 160 MHz. This router ensures faster connectivity and extended frequency support.

The router also features 802.11ad Wi-Fi for transfer rates of up to 4.6 Gbps. Along with the super-fast connectivity offered, the router takes advantage of 802.11a/b/g/n/ac for both 2.4 and 5GHz frequencies. The router also comes with active antennas to strengthen the weak signals and increase the Wi-Fi coverage throughout offices and large homes.

Netgear Nighthawk X10 Ad7200 Router Setup

Specifications

  • Model: R9000-100NAS
  • Memory Storage Capacity: 8 GB
  • Flash Memory size: 250 GB
  • Wireless Type: 802.11ad
  • USB Ports: 2
  • Connection: Wireless/USB

To know how to perform Netgear Nighthawk X10 AD7200 smart wifi router setup, you must first know how to unbox the contents.

Contents in the box

  • The Netgear Nighthawk X10 AD7200 router
  • Ethernet Cable
  • Power Cord
  • The User Guide and other Documentation

Steps For The Netgear Nighthawk X10 Ad7200 Router Setup:

  • First, disconnect all the devices connected to your router.
  • Unpack the contents present inside the box along with the Netgear Nighthawk router.
  • Place the router next to the modem.
  • Have the yellow Ethernet cable in hand and connect it to the Nighthawk router and the modem.
  • First, disconnect all the devices connected to your router.
  • Make sure that the modem is plugged into the power source.
  • Now, you can take out the power cord from the packaging and connect it to the power source and to the back end of the router.
  • The Power LED will light up on the router.
  • The initial setup is now complete.

(NOTE: The default credentials are present at the back of the Nighthawk router )

  • When the connection is successful, you can configure the rest using your computer.
  • Open the Wireless section of your computer.
  • Select the SSID that goes by the name Netgear, and enter the default password that is located at the back of the Netgear router.
  • You will partially be connected to the Internet.

Let us complete the full setup process for the Netgear Nighthawk X10 AD7200 router setup.

  • Open the default browser on your computer.
  • Enter the router's login URL in the address bar and press the Enter button.
  • The Netgear Genie page will open.
  • If you have been using a Netgear router before, you can select the Help Me Choose radio button.
  • Click the Next button.
  • Once the Internet connection is detected, you will see the network name and the network password for the 2.4GHz and 5GHz bands. Click Next.
  • You will be prompted to download the Netgear Genie app and the ReadSHARE Vault App.
  • Click the checkbox for both options, click the Next button.
  • Once done, the assistant will check if there is a new firmware update available.
  • If there is no firmware update, follow the on-screen commands. If there is an update, click Next and wait for the router to reboot.
  • Once the setup is complete, you have to register the router so that you can receive timely updates.

You have now successfully finished the steps for the Netgear Nighthawk X10 AD7200 router setup. For more assistance on resolving Netgear Nighthawk router issues, CALL our tech experts.