How To Do Netgear Nighthawk Ax8 Rax80 Router Setup?

Netgear Nighthawk Ax8 Rax80 Router Setup

The Netgear Nighthawk AX8 RAX80 router combines top speed and the capability to keep your online life secure at all times. When Wi-Fi routers are concerned, this device has the best throughput. Let’s now look into the Netgear Nighthawk AX8 RAX80 router setup in detail.

Unpacking The Router:

  • Open the router box.
  • Check if the following components are present in the box:
  • The Netgear Nighthawk AX8 RAX80 router
  • The power adapter
  • The Ethernet cable
Netgear Nighthawk Ax8 Rax80 Setup

Extending The Antennas:

Before you start with the procedure to install your router, make sure that you extend its antennas.

Positioning The Router:

Make use of the following guidelines to position the router:

  • Keep the router in a central location where your computers and all the other devices operate.
  • Let the router be within reach of an AC power outlet and close to your wired computers.
  • Place the router in an elevated position.
  • You have now finished the initial stage in the Netgear Router Nighthawk AX8 RAX80 Wi-Fi setup. Now, we shall see how to power on the router and connect it to a modem.

Procedure For Cabling The Router:

  • Unplug your modem. If it uses a backup battery, remove it. After re-inserting the battery, plug the modem back in.
  • Connect the modem to the router’s yellow Internet port using an Ethernet cable.
  • You need to connect the power adapter to the router and then plug the adapter into an electrical socket.
  • Now, press the Power On/Off button located on the router’s rear panel.
  • You can be sure that the router is ready when its Power LED lights solid white.
  • You have now completed another stage in the Netgear Nighthawk AX8 RAX80 router setup.

Connecting To The Network:

You have the facility to connect to the router’s network either through a wired or Wi-Fi connection.

For a Wired Connection:

  • Confirm that the router is receiving power.
  • Connect one of the ends of an Ethernet cable to your computer’s Ethernet port.
  • Now, connect the opposite end of this Ethernet cable to an Ethernet port on the router. Your computer will now connect to the LAN.

For a Wi-Fi Connection:

  • Confirm that the router is receiving power.
  • On your computer, locate the Wi-Fi network. Now, select it.
  • NOTE: You can easily locate the Wi-Fi Network Name on the router label.
  • You can now join the Wi-Fi network and enter its password. You can find this password also on the router label.
  • A few moments after you enter the Wi-Fi password, your device will connect to the Wi-Fi network.
Netgear Nighthawk Ax8 Rax80 Wi-Fi Router Setup

Logging Into The Router:

  • In the address bar of the browser, enter the IP address of the router.
  • In the Login window that pops up next, enter the username and password.
  • Start configuring your router settings.

You have now successfully finished the entire Netgear Nighthawk AX8 RAX80 router setup.