Netgear N750 Router Setup
You need to set up the router before you can start accessing the router network. The following steps will help you for Netgear N750 router setup.
- Netgear N750 Router Setup
How To Setup Netgear N750 Router
For Netgear WNDR4300 N750 router:
Take the stand provided with the router and position the router in the slot of the stand.
Place the Netgear router in a place where there is less interference from other electronic devices and where the network range covers the maximum distance of the area.
See that you can connect the modem and the router within a cord’s length.
Next, turn on the modem, then connect an Ethernet cable between the modem and the WAN port (yellow) of the router.
After that, connect the power cord to the router and power it on.
Either use a wired or wireless connection mode to set up the router network.
Wired network connection:
Connect the router’s LAN port and your computer using another Ethernet cable for Netgear N750 router setup.
Check if the system notifies the connection status of the router on the screen.
If the computer does not indicate the Ethernet connection, then check the cable connections.
Wireless network connection:
To connect the computer to the Wi-Fi router network, note down the Wi-Fi Network Name (SSID) and the Network Key (Password), which at the back of the router device.
Turn on the Wi-Fi menu on the computer, then the computer scans for the available network.
Choose the Netgear router network name and enter the network password to connect for Netgear N750 router setup.
For easy wireless network setup, use the WPS push button method.
Find the WPS button on the router and press it, and within two minutes, turn on the Wi-Fi menu on your computer.
Select the Wi-Fi router network on the screen to connect.
- Netgear router setup page to configure the router settings.
You have to log in to the
Connect the computer to the router network using an Ethernet cable.
Open the browser application, then type the Netgear router login URL present on the label, and press Enter to access the page.
On the login page, input the username and password, which are also mentioned on the router’s label.
Following that, the Netgear router’s configuration page appears in the window.
You can modify the basic and advanced router settings on the page.
It is advised to secure your network with a strong password on Netgear N750 router setup. You can also change the SSID of your network.