How To Perform Linksys Wrt310n Router Setup?

Linksys Wrt310n Router Setup

The Linksys WRT310N Wireless-N router acts as a wireless access point that connects your wireless computers and devices. It provides a 4-port full-duplex 10/100/1000 built-in switch to connect your wired devices using Ethernet cables. The WRT310N router also serves as your network's Dynamic Host Configuration Protocol (DHCP) Server with a powerful Stateful Packet Inspection (SPI) firewall to protect your computers against intruders and most known Internet attacks. It also supports Virtual Private Network (VPN) passthrough. Scroll down this page to configure your Linksys Wrt310n Router Setup.

How to perform Linksys Wireless WRT310N router setup?

Step 1

Locate the power cable and connect it to a power source.

Step 2

  • Insert the other end of the power cable to the router's power jack, typically located in the rear.
  • Your router should power ON.

Step 3

  • Connect the router to your Internet modem using an Ethernet cable.
  • Your router must be connected to a modem to provide the local network with an Internet connection.
  • The cable must be connected between the WAN port of the router and the Ethernet port on your modem.

Step 4

  • Connect your Linksys router to your computer using another Ethernet cable.
  • Open any web browser and type your router’s default gateway IP address to access its web-based user interface.

Step 5

  • You should see two blank text fields where you have to enter a username and a password.
  • The default username for your Linksys WRT310N is (blank).
  • The default password is admin.
  • After entering the linksys router login credentials, click on OK and you should see the router setting page on the screen.

Step 6

Now you can change the basic setup of your router.

Step 7

  • Change the router password.
  • Next change the SSID and password for your Linksys router.

Still, do you have any problem with Linksys wrt310n router setup? Call our tech support for remote assistance.