Solutions for Linksys Router Not Working
If the Linksys router not working, there could be an issue with the internet connection or the router itself. To check whether there is a problem with the Linksys router, connect the modem to the computer bypassing the Linksys router. If the internet connection is established, it means that the Linksys router needs to be serviced.
Linksys Router Port Forwarding Not Working
If port forwarding is not working on your Linksys router, follow these guidelines to troubleshoot the issue and resolve it.
- Linksys router setup, follow these steps below to solve Linksys router not working. Log into your Linksys router by typing its IP address in your web browser’s address bar and pressing Enter. On another browser tab, go to the TCP Port Status Tool page and make a note of the IP address to solve Linksys router port forwarding not working.
If there is another router in use in addition to the
Return to the Linksys router’s EWS page. Navigate to the Status tab and check whether the Internet IP address field matches the IP address that you noted earlier.
If it does not match the IP address that you noted, it means that the address is given by the ISP from a different router. (In technical terms, this is a DMZ, which stands for Demilitarized Zone.) Make a note of this IP address.
- Linksys EWS pageclick DMZEnabled. Set the Source and Destination IP addresses. (Enter the IP address of the DMZ which you noted earlier.) Click Save Settings to fix Linksys router port forwarding not working issue.
Note down the Default Gateway and enter it in a new tab on your web browser. Press Enter. Now, locate the DMZ section and enable DMZ. To enable DMZ, click ‘Applications & Gaming’ on the
If this does not solve the issue, navigate to the Security section of the Linksys router’s EWS page, and click Firewall. Configure this firewall so that it is at the minimum security setting. Click Save Settings.
If the Linksys router port forwarding not working issue persists, contact our tech support team for assistance.
Linksys Router Ethernet Ports Not Working
If the Linksys router Ethernet ports not working, perform these steps before servicing/upgrading the router.
Check whether your modem is connected to the Internet port of the Linksys router.
Bypass the Linksys router and connect the modem directly to your computer. Check whether there is an internet connection. If an internet connection is established, it means that the Linksys router needs to be serviced. If there is no internet connection, contact your ISP.
- router setup, reset it to check whether it solves the Linksys router ethernet ports not working issue. While the Linksys router is powered on, detach its power cable and wait for two minutes. Reattach the Linksys router’s power cable and check whether the issue is resolved.
Before repairing the
Linksys Router 2.4 Ghz Not Working
If the Linksys router’s 2.4Ghz network does not work, follow these steps to troubleshoot the issue.
Power cycle the Linksys router. Detach the router’s power cable and wait for about ten seconds. Reattach the power cable to the Linksys router and check whether the Linksys router not working issue persists.
- Control Panel Network and Sharing Center Change Adapter Settings Choose the TCP/IPv6 option and ensure that it is unticked.
Update the firmware of the Linksys router and check whether it solves the Linksys router 2.4 ghz not working issue. If it persists, contact our tech support team.
Linksys Router Admin Password Not Working
To troubleshoot this problem, perform the following steps.
First, long-press the Reset button of the router for 30 seconds.
Make sure that the LED is on and flashes while performing this to solve Linksys router not working.
Next, the Power LED must blink while pressing the Reset button.
Disconnect the cable from the Linksys router for 30 seconds and then connect it back.
Once the reset is done, the password should automatically set to the current admin.
Linksys Router Guest Access Not Working
To troubleshoot this Linksys router guest access not working issue, do the following steps.
First, check whether you can access the Internet with a new browser.
Next, clean the web browser’s cache.
- Linksys router guest access not working.
Now, check whether the connection of the router is active and present, and then verify it by connecting it to the main wireless network for solving
Make sure that there is an active internet connection by connecting the computer to the modem.
Enter the password for the guest access correctly.
Reset the Linksys router to the factory settings.
Go to the Linksys router’s web based setup page to fix Linksys router not working.
Tap the Administration tab and then tap Factory Defaults sub tab.
From the Factory Defaults section and select the Restore Factory Defaults button.
Linksys Router IP Not Working
To troubleshoot this Linksys router not working issue, perform the following guidelines below.
First, type the default IP address in the URL box and then tap Enter.
A small box will prompt you to key in the credentials for the username and the password.
Enter the username as admin and then Password as admin.
Next, restart the Linksys router and then Restart the modem.
Now, connect the Linksys router and the modem with a cable to solve Linksys router IP not working.
Reset the Linksys router using the Reset button at the rear of the router.
Insert a paper clip into the small opening of the Reset button.
Press the Reset button for 10 to 20 seconds.
Release the Reset button after 10 seconds, and then the LED will start to flash.
Now, the reset process is done, check whether the Linksys router IP not working.
Linksys Router Login Not Working
To troubleshoot this issue, perform the following guidelines.
First, tap the Start button and type cmd and press the Command prompt.
On the command prompt, type ipconfig and then press the Enter key.
Next, on the right corner, right-click the Network Connection icon for solving Linksys router login not working.
Open Network & Internet Settings.
Select View your Network properties.
Check whether the Linksys router not working problem has been resolved, if not, reset the Linksys router.