Linksys Re6500 Blinking Orange Light - [SOLVED]

Linksys Re6500 Blinking Orange Light

Linksys RE6500 is a Wi-Fi range extender that helps in boosting the existing wireless network range. When you have finished setting up your Linksys RE6500 extender, the Wi-Fi range you are having will be extended. However, no device is absolutely free from troubles. This stands true for Linksys RE6500 as well. In many situations, users face the “blinking orange light” problem on their Linksys RE6500 extender. And many times, they are stumped and are unable to resolve the issue. Let us discuss the methods to fix the issue using a few quick steps:Following are the troubleshooting methods to resolve the Linksys RE6500 blinking orange light issue:

Method 1-Solving The Problem With Router Connectivity:

At times, you might encounter the Linksys RE6500 blinking orange light issue if the extender is not able to establish a proper connection with the main router. So, in this case, you have to reboot the extender. Now, follow the steps given below to do the same:

  • First, disconnect the extender from all the devices.
  • Next, turn off the extender.
  • Allow it to rest for some time.
  • Reconnect the extender to your network and then turn it on once again.
  • Finally, connect the extender to your router again.
  • Check your LED’s status on the extender.

If you find that the problem persists, move on to the next troubleshooting method.

Method 2 - Updating The Extender’s Firmware:

If your extender’s firmware is outdated, you might face the orange light blinking issue. Check whether the firmware is outdated. If it is, then follow these instructions to update the firmware

  • First, plug your Linksys RE6500 extender into a wall outlet and then turn it on.
  • Next, using an Ethernet cable, connect your extender to your router.
  • Turn on the computer that is connected to your wireless network.
  • Open the default browser and then enter the Linksys extender’s IP address in the address bar.
  • Access the Linksys extender setup web page.
  • Log in to the device using your login credentials.
  • Once you have successfully logged into the device, click on the Firmware Update button.
  • If you find that a firmware update is available, you need to click on the Start Upgrade button.
  • You will now see that your Linksys RE6500 extender starts updating its firmware.
  • Check and see if the Linksys RE6500 blinking orange light problem has been solved.

In case the issue is not resolved, move on to the next method.

Method 3 - Factory Resetting The Extender:

Factory resetting your extender will result in the deletion of all the existing settings on the extender. The device will then be returned to its default settings. Therefore, make it a point to have a backup of all the extender’s personalized settings. So, after the reset, you can restore the settings using the backup.Now, to factory reset your Linksys RE6500 extender, carry out the following instructions:

  • First, confirm that you have powered on your extender.
  • Next, ensure that the power supply (from the wall outlet) to the extender is constant.
  • Locate the Reset button on the extender.
  • Make use of a paper clip to press the Reset button.
  • Wait patiently for the factory reset to finish.

The Linksys RE6500 blinking orange light issue should be fixed now.