How to Setup Netgear R6300 Router | Enable AP Mode & Bridge Mode

Setting Up Netgear R6300 Router

To set up the Netgear R3600 router, follow these guidelines.

Connect the Netgear R6300 router’s power cable to the rear power port and wall power outlet. Press Netgear R6300 router’s Power button.
The Power LED glows on the Netgear router. Navigate to the Netgear R6300 router’s EWS page on your web browser’s computer.
(The Netgear R6300 router’s IP address can be found on its label.)
Type this IP address in the address bar and press Enter to setup netgear router.
Go to the Wireless option under the Basic tab and click it.
Click the checkbox beside ‘Enable SSID Broadcast.’ Choose the required data download rate from the Mode drop-down list.
Click WPA, WPA2, or WPA PSK from the Security Options section.
Select the Guest Network tab to set up a Guest Network on your computer. Set the Guest Network preferences and then click Apply for setting up Netgear r6300 router.

You can also enable keyword blocking on this Netgear router from the Advanced tab.
Go to the Advanced tabBlock Sites. Enter the domain names to be blocked in the ‘Type keyword here’ field and click ‘Add keyword.’
Choose a Keyword Blocking option at the top and then click Apply while following using how to setup Netgear R6300 guide guide.
View the Netgear R6300 router’s WPS options and configure them by going to AdvancedWireless Settings for setting up Netgear r6300 router
Set the Traffic Meter by clicking AdvancedTraffic Meter. You can select what the Netgear router should do when a certain traffic limit is reached.
You can also set when a pop-up message should appear on the screen when the monthly limit is reached. Click Apply. This completes the Netgear R6300 router setup.

Netgear R6300 VPN Setup

Here are the Netgear R6300 VPN setup guidelines. First, get a VPN service which you can use for the Netgear router’s VPN setup.

Navigate to the DDWRT site on your computer and download the firmware for the Netgear R6300 router.
Flash the DDWRT firmware on your Netgear R6300 router. Navigate to the Netgear R6300 router’s EWS page by entering its IP address in the web browser’s address bar and pressing Enter.
Type the Netgear R6300 router’s login credentials in the appropriate fields and click Log In. Navigate to the Netgear router EWS page’s Update section. Setup your router using how to setup Netgear R6300 guide
Click the Browse button and select the DDWRT file which was downloaded on your computer.
Wait until the DDWRT firmware is flashed on your Netgear R6300 router. It restarts after the firmware is updated automatically.
However, power off the Netgear R6300 router after the firmware is updated and then power it on after a few minutes.
Go to the DDWRT control panel page and navigate to the Time Settings. Set the time data on this page to match the VPN server data for Netgear R6300 VPN setup.
Enable the NTP client and then go to the DHCP settings.
You can find this option in the Network Address Server Settings section. Enable the DHCP server, set the DHCP type, and key in the Static DNS 1, Static DNS 2, Static DNS 3, WINS data. Enable the ‘Use DNSMasq for DHCP,’ ‘Use DNS Masq for DNS.’ and ‘DHCP-Authoritative’ options.
The recommended custom firewall commands are as follows. Go to the Firewall option and type these commands without quotes in the firewall command field.
‘iptables -N VPN
Iptables -F VPN
Iptables -I INPUT -i tun0 -j VPN
Iptables -I FORWARD -i tun0 -j VPN
Iptables -A VPN -i tun0 -o br0 -j ACCEPT

Iptables -I POSTROUTING -t nat -o tun0 -j RETURN’
Click the Save Firewall option.
Type the following startup commands in the Startup field without quotes.
‘echo your_username >> /tmp/password.txt
echo your_password >> /tmp/password.txt
/usr/bin/killall openvpn
/usr/sbin/openvpn --config /tmp/openvpncl/openvpn.conf --comp-lzo yes --route-up /tmp/openvpncl/route-up.sh --down-pre for Netgear R6300 VPN setup
/tmp/openvpncl/route-down.sh --daemon’
Click the Save Startup option. To setup router follow how to setup Netgear R6300 guide
Set up the OpenVPN client by going to Services VPN.
Click the Enable radio button beside the Start OpenVPN Client option.
Enter the port data(1194), set the tunnel device(TUN), tunnel protocol(UDP), encryption cipher(Blowfish CBC), hash algorithm(SHA 1), TUN MTU settings(1500 in both fields).
Enable NAT and Advanced Options. Type the following text in the Additional Config field.
‘comp-Izo yes
auth-user -pass /tmp/password.txt
persist-key
persist-tun
tls-client
remote-cert-tls server’.
Open the Ca.crt file with a document viewer application on your computer. Copy and paste the contents in the CA Cert field.
Click Save and then click Apply Settings for setting up Netgear r6300 router VPN. Reboot the Netgear R6300 router to complete the Netgear R6300 VPN setup

Netgear R6300 AP Mode

Here are the guidelines to enable AP mode on your Netgear R6300 router. Make sure that the Netgear R6300 router is connected to the computer with an Ethernet cable using how to setup Netgear R6300 guide.

Launch any internet browser (such as Google Chrome) on your computer and go to the Netgear router’s EWS page. Type ‘192.168.1.1, 192.168.0.1, or 10.0.0.1’ without quotes in the address bar and press Enter.

Enter the Netgear router login credentials which are ‘admin’ and ‘password.’ Type these in the username and password fields, respectively. Click Log In for Netgear R6300 AP mode.

Navigate to the Advanced tab and go to Wireless Settings. Click the checkbox beside Enable AP mode. The IP address and DNS Server address are set dynamically by the DHCP server.

If you need to set a static IP for the access point on setting up Netgear r6300 router i AP mode, deselect the ‘Get IP Address Dynamically’ option. Enter the IP address, gateway, and IP subnet mask data. Make sure that the IP address used here is different from the IPs set for the main router’s clients. Click Apply for Netgear R6300 AP mode.

Now, attach an Ethernet cable to one of the AP’s(Netgear router on which AP mode has been enabled) LAN ports. Attach the free end to the main router’s LAN port. This completes the Netgear R6300 router’s AP mode setup

Netgear R6300 Bridge Mode

Navigate to Advanced and then select Advanced Setup Wireless Settings.
Tickmark the box beside the ‘Use other operating mode’ option.
Select Enable Bridge Mode Setup bridge mode wireless settings.
Select your wireless network from the Choose a Wireless Network drop-down menu. Also, select the name of the wireless network from the Name (SSID) drop-down list.
Choose WPA2-PSK (AES) under the Security Options section for Netgear R6300 Bridge mode.
Make sure to enter the passphrase of the Netgear router in the Passphrase field.
Click Apply twice.

Netgear R6300 QOS Setup

Launch the Netgear R6300 router account window.
Select Advanced Setup QoS Setup.
Tickmark the box next to the Turn Internet Access QoS option for Netgear R6300 QOS setup.
Select Setup QoS Rule to view the priority rules. Select the Edit or Delete button to remove any specific rules.
Select the Delete All button to delete all the rules from the Priority Rules list. Select the Add Priority Rule button to add the rule.
Type the name of the application in the ‘QoS Policy for’ field to Netgear R6300 QOS setup.
Select either the Applications or Online Gaming option from the Priority Category drop-down menu on setting up Netgear r6300 router QOS.
Select the Add a New Application or Add a New Game option from the Applications drop-down list for Netgear R6300 QOS setup.
Choose the connection type as either TCP, UDP, or TCP/UDP in the Connection Type field.
Select Low, Normal, High, or Highest from the Priority menu. Click Apply in the QoS Setup window to save the setup settings. To setup follow how to setup Netgear R6300 guide

How to Reset Netgear R6300 Router

Hold the Power button on the Netgear R6300 router control panel to turn the Netgear R6300 router on.
Release the Power button on the Netgear R6300 router control panel when you see the Power LED blinking. In order to setup follow how to setup Netgear R6300 guide
Find the Reset button at the rear panel of the Netgear R6300 router to reset Netgear R6300 router.
Press the Reset button using a ballpoint pen, paper clip, or other small objects.
Hold the Reset button for nearly five to ten seconds to reset Netgear R6300 router.
Once you reboot your Netgear R6300 router, use the default username and password to sign into the Netgear R6300 router account.
Reconfigure the Netgear R6300 router network settings

Netgear R6300 Blinking Power Light

Reinstall the firmware of the Netgear R6300 router to fix the ‘blinking power LED’ problem.
You need to download the recent version of the Netgear R6300 router firmware from the manufacturer site.
Open the downloaded zip file.
Now, download the TFTP client software on your Windows computer to solve Netgear R6300 blinking power light.
Connect your Netgear R6300 router to the computer and then configure the static IP address settings.
Open the downloaded TFTP file. When prompted, type the IP address of the Netgear R6300 router in the Server field.
Enter the default password of the Netgear R6300 router in the Password field. Select the three-dot icon beside the File field to select the firmware file name.
Power off the Netgear R6300 router and turn it on after ten seconds to solve Netgear R6300 blinking power light.
At the same time, select the Upgrade button. You should see the Power LED turns green on the Netgear R6300 router control panel.

Netgear R6300 Not Working

If the Netgear R6300 router is not working, check the internet connection.
Reset the Netgear router manually.
If the issue persists, hard reset your Netgear R6300 router to the default factory settings.
Upgrade the firmware of the Netgear R6300 router to the recent version. To setup follow how to setup Netgear R6300 guide.

How to Setup Netgear R6300 Easily