EFFECTIVE STEPS TO KNOW HOW TO SETUP LINKSYS WIFI EXTENDER
The Linksys Wi-Fi extender/bridge is used to extend the Wi-Fi signal to devices present in the dead zone. It acquires the signal that is given by the router and transmits it to the zones where there is no proper Wi-Fi access so let's know How to Setup Linksys Wifi Extender. It can offer internet access to remote areas through wired or wireless connections. In case you have a house that is very spacious, then you can make use of repeaters for the Wi-Fi signal to reach all the rooms. If you want to enhance your wireless experience throughout the house, then make use of Linksys extenders.
How to Customize a Linksys Range Extender
The Linksys Wi-Fi extenders obtain the signal from the access point and deliver it in zones where there is reduced Internet connectivity or no Internet access at all.
It can carry the signal through a wired or wireless connection.
The steps given on this page will help you to set up the Linksys wireless extender manually.
- Before moving to the setup process, you have to verify whether you have the following requirements with you.
- Get to know the wireless network name, wireless channel, and the wireless password of the router.
- You can access the wireless settings by using four methods namely the web-based setup page, Linksys smart Wi-Fi, Linksys Connect, and the computer's Operating System.
- Make use of any one of the methods to access the settings and find the above-specified requirements.
- The next step in the procedure is to reset the Linksys range extender. This will also resolve any problems that have occurred with the repeater.
- Locate the Reset button and press it. Continue pressing it for at least 5 seconds or until the LED light starts to blink.
- Next, connect the computer to the Ethernet port available on the repeater.
- Associate your range extender with the power supply and check if the LED lights are stable.
- Turn on your device and open a web browser such as Chrome or Firefox on your device doing How to Setup Linksys Wi-fi Extender.
- Key in the router's IP address in the search bar. The web management page of the router will be displayed on the next screen.
- The username and password should be entered correctly in the next window that appears while following How to Setup Linksys Wifi Extender.
- Click the Login button and then select the Wireless tab.
- Choose the Basic Wireless Settings option. Now make sure that you set the Radio button to Manual. Key in the name of the network and the passphrase or the WEP key.
- Tap the Save Settings option to .
- Disconnect the power supply from the router and the repeater. After a few seconds, connect the router and when all the lights become stable, associate the extender with the power supply.
Linksys Extender Reset
Resetting is done when an issue occurs with the extender. Problems such as extender not connecting to the router, not turning on, extender lights not working, and the extender is not providing a Wi-Fi signal are addressed here. You can make use of the solutions effectively to sort out any issues that occur with your Linksys extender. The reset process will take 3 to 5 minutes and the settings will be restored to its default values.
How do I Reset My Linksys Range Extender
- If you notice that you Linksys range extender is not working properly, then you can reset the settings to default to set it right.
- Follow the steps given below to reset the Linksys repeater.
- The initial step is to verify if the range extender is connected to the wall power supply.
- Next, you should locate the Reset button present on the extender for Linksys Extender Reset.
- It is placed near the Auto Configuration button.
- Press the Reset button and hold it for at least 10 seconds.
- Release the Reset button after a while for Linksys Extender Reset.
- The Extender takes a few minutes to restart and return to the default factory settings to know How to Setup Linksys Wifi Extender.
- Wait patiently and then perform the initial setup to use the extender.
- Since all the settings are erased, you will have to modify them according to your choice with the help of the Web management page.