HOW TO SETUP A NETGEAR WN3000RP

The Netgear WN3000RP Wi-Fi extender is used for increasing the range of your wireless network. You must connect the Netgear WN3000RP Wi-Fi range extender to an existing wireless network. You can either use the WPS mode or web browser setup guide to connect the extender to your router. The easy steps on how to setup a Netgear WN3000RP Wi-Fi range extender are provided right here on this web page.

NETGEAR WN3000RP SETUP

Before proceeding with the guidelines for how to setup a Netgear WN3000RP mentioned below, make sure your Netgear WN3000RP computer and router are in the same room.

how to setup a netgear wn3000rp

CONFIGURE THE NETGEAR WN3000RP RANGE EXTENDER USING A WIRELESS COMPUTER

CONNECTING FIOS ROUTER TO NETGEAR WN3000RP RANGE EXTENDER

The Netgear router can be set up as an AP with a FiOS router. Refer to the following how to setup a Netgear WN3000RP steps to make this set up easy.

Note: The cable should be plugged into the WAN port of the Netgear router and the LAN port of the FiOS router.

HOW DO I RESET MY NETGEAR EXTENDER WN3000RP?

To reset your Netgear extender WN300RP, follow the step-by-step how do i reset my netgear extender wn3000rp instructions below.

NETGEAR WN3000RP SETUP WIZARD DOWNLOAD

There is an application called Smart Wizard Utility for setting up the extender. The application automatically displays while you attempt to launch a web browser after installing the extender.

  • Open the web setup page of the extender using its IP address.
  • Select the Setup Wizard option from the Menu. You should select the same wizard that opens during the installation for netgear wn3000rp setup wizard download.
  • Now, select your network SSID from the list of networks displayed. Otherwise, you can manually add your network’s SSID.
  • After providing your network’s security key, click Continue.
  • The extender will connect to your wireless network and the extender’s network name changes to your wireless network name with the EXT as a prefix.
  • Once the connection is set up between the extender and your network, your computer will be disconnected from the extender’s network.
  • Join the extender’s network to the software using which you manage your wireless connections.
  • Now, check if the PC to extender LED is lit on the extender’s panel and then click Continue on the Extender wizard screen using how to setup a Netgear WN3000RP extender guide.