HOW TO RESET D-LINK ROUTER
How to reset D-Link router? If you have forgotten your password or if there are issues with the network connection, resetting the router is the simple and best solution. The D-Link router can be reset in two ways. One way is to using the Reset button, and the other one is from the admin control panel. For button reset, press and hold the reset button on the router for 10 seconds, and for the Admin control panel reset, you may have to go to the manufacturer site to configure the settings once again.
D-LINK PASSWORD RESET
To reset the D-link router password, follow the instructions given below.
Go to the D link router’s official site using the 192.168.0.1 IP address.
Enter the required credentials in the given field and click the Login button.
Click the menu followed by the Wireless Settings option for D-link password reset. Router Setup
You will find the Manual Wireless Connection Setup button on the Wireless Settings screen, select it.
Scroll down the screen, choose the Pre- Shared key option, and enter the new password in the given field.
D-LINK DCS 933L RESET
For D link DCS 933L reset router, perform the how to reset D-Link router instructions guided instructions given below.
Locate the Reset button on your D- link DCS 933L router.
Get a paperclip to press the Reset button for d-link dcs 933l reset.
Press & hold the Reset button for a maximum of 10 seconds.
Once the router is reset, all the information stored on the router will be erased, and you will be prompted to set it from the beginning.
D-LINK DI 524 PASSWORD RESET
So how to reset D-Link router, Open a web browser and launch the manufacturer’s configuration page by entering the URL in the address bar.
Now, tap Admin, and type the administrator password and press Enter.
Next, tap the Setup, that is found on the top of the page for d-link di 524 password reset.
Then, find the Wireless settings option on the left side and then click on it.
After that, tap the Manual Wireless Connection Setup and search for the pre-shared key.
At last, on the pre-shared key bar, enter the new password.
Click the Save settings option and save the new password.
HOW TO RESET D-LINK DIR 825 ROUTER
With reset button,
Make sure that the D-Link dir 825 router is powered on for d-link password reset.
Now follow the how to reset d-link dir 825 router guide, turn the router on and check for a small hole at the rear of the router which consists of the reset button.
Take a bent paper clip, insert it into the hole and press the reset button for up to 10 seconds.
After 10-20 seconds, make sure to release the button.
Now, the router will start to reboot automatically.
When the WLAN stops to blink, you can confirm that the router is reset.
From the Admin control panel,
Launch the manufacturer site and go to the Maintenance or click the Tools tab.
On the router page, you can find the option Save and Restore settings or System option.
Now, tap the Save and Restore option by following how to reset D-Link router guide.
Then, tap Restore device or Restore Factory Defaults. The reset is now complete.
D-LINK DIR 600 RESET
To reset the D Link DIR 600 router manually, read and proceed the instructions given below.
Before you begin the d-link dir 600 reset process, verify that your D Link DIR 600 router is turned Off.
If the router is turned on, then turn it off and disconnect it from the power source for d-link password reset.
Now, search & locate the Reset button on your D Link DIR 600 router.
Usually, the Reset button is located at the back of the router.
Now, press the Reset button using the paperclip for a maximum of 10 seconds for d-link dir 600 reset.
After that, release the button and allow the router to release the internal energy in it using how to reset D-Link router guide.
D LINK WBR 1310 RESET PASSWORD
Press & hold the Reset button using the paperclip.
Do it for a maximum of 5 to 10 seconds.
After that, release the button and set the password from the beginning.
After resetting the router password, go to the router’s official site and set the new password as per your wish.