Complete Description to Reset Belkin Router

Reset Belkin router access point can be done quickly and easily. An accessible physical Reset button is present on the Belkin router that can be utilized for resetting it. If you are facing difficulties in resetting the router using the Reset button, you can carry out the process from the web-based Setup site. You can access the website from any personal computer that is linked with the Belkin network router. The easy instructions on how to reset Belkin router are given right here on this web page.

How to Reset Belkin Router

Follow the procedure that has been specified here to reset your router easily.

The first step is to disconnect the modem from the power supply to Reset Belkin Router.
Press the Reset button available on your router and hold it for a few seconds.
Wait for 15-20 seconds after you release it.
Next, detach the wireless router from its power source.
Connect the modem to the power outlet and wait patiently until it boots properly.
The next step is to connect the router to the electrical outlet.
Your router will now be reset.

How do I Reset my Belkin Router to Factory Settings

The Belkin router can be reset if it faces any issues. A simple reset will help the router function normally.
There are two methods to do this. Make use of any one of the methods to reset your router.

METHOD-1-USING THE RESET BUTTON:

Find the Reset button of the Belkin router. It will be available in the rear part of the router.
Take a paperclip and straighten it. Use the paperclip to press the Reset button. Hold it for a few seconds.
Release it after 10 seconds, and the reset process will begin. The router will be restored to its original settings. You have to set up the router again to use it.
Once you release the button, the lights available on the router will start flashing. After the reset process is over, the Power light will stop blinking.
Your reset process is now over.

METHOD-2-USER INTERFACE:

Initially, find the IP address of the router. It will be printed on the label stuck at the back of the router.
Else, check the documentation that came along with the router at the time of purchase. The IP address will be printed there.
Turn on your computer and open a browser such as Edge or Firefox.
In the address bar, you have to enter the IP address of the router. Press the Enter button.
In the Login window, key in the User ID and Password and click the Submit button to Reset Belkin Router.
Select the Utilities tab available on the next screen.
Choose the Restart router option and click the OK option to confirm.
The Belkin router will then restart, and the web interface will appear once the reset process is over.
Next, tap the Restore Factory Defaults option to restore the settings successfully.
Click Restore Default and then choose Yes option on the Confirmation screen.
The settings will now be restored to the factory defaults.

How to Reset Belkin N150 Router

To reset the Belkin n150 router, follow the instructions given below.

Usually, you can reset the router by pressing & releasing its Reset button. Push the Reset button and release it after a while.
When you push the Reset button, the light on the router will begin to blink.
Once the reset is complete, the router light will become solid.
You can also reset the router using the Web Interface.
Perform the instructions given below to reset the router using Web interface.
On your computer, open the default browser and type http://192.168.2.1 in the search bar.
Tap the Enter button. Click the Login option and tap the Submit button.
Click the Restore Factory Default option in the Utilities tab.
Click Restore Defaults. Click the OK button to Reset Belkin Router.
The restoration process begins and once the process is completed, the Router will restart automatically.

How to Reset Belkin N300 Router

To reset the Router through the Web interface, follow the instructions given below.

Begin the reset process by opening a web browser.
On your system (Windows or Mac), open a browser and type the http://192.168.2.1 URL code in the search bar.
Click the Enter button on the computer’s control panel or click the right-arrow at the end of the search bar.
Wait for the Router’s home page to open.
Click the Login option at the top-right corner of the screen.
Leave the password field blank and click the Submit button.
Click the Restore Factory Default option in the Utilities tab.
Click on the Restore Default button and tap OK to confirm the process.
Wait patiently for the reset process to complete.
The router will reboot automatically once the reset process is complete.

How to Reset Belkin N750 DB Router

Connect your Belkin n750db router to the power outlet.
The reset button is present at the back of the router.
Push the ‘Reset’ button and then release it. Now the LED lights on the control panel will flash for a moment.
The reset process completes when the power light on the control panel stops blinking.
Press the Reset button on the control panel and hold it for at least 10 seconds to start the restoration.
Release the button after 10 seconds. The LED light on the control panel will flash.
When the power light stops blinking and becomes solid, it indicates that the router gets fully restored to the factory defaults. You can even reset the router from the User Interface.

How to Reset Belkin AC750 Router?

To reset the Belkin AC750 Router, you need to have access to your router password.
The Belkin AC750 router can be reset either by hard reset button present on the rear side of the router or by logging into the Belkin site.
To reset the router through the button, push and then release the reset labeled button on the rear side of the device to reset the router.
Once the reset process completes, the power light starts to blink. The router’s light starts blinking and then turns to solid back.
To reset the router from the Belkin web setup page, proceed with the steps below.
Open the web browser like Google Chrome and enter 192.168.2.1 in the search bar to access the router’s user interface.
To log in, type the router’s password and click submit to Reset Belkin Router.
Open the Utility tab and then choose Restart Router option from the list. Click OK.
Once the router restarts, the user interface will appear. The reset process is complete. You have to reconfigure the router.

How to Reset a Belkin N600 Wireless Router

Resetting is done in cases when your router is not functioning properly. Without any changes in the programmed settings, the router restores to its routine operation.

You can also perform the process of resetting if you have forgotten your password.

You can learn to reset the Belkin n600 router from the following steps.

After you have found the barcode, look for text that reads SSID and password.

Locate the reset button on your router. The reset button for Belkin n600 router is red.

Once you have located the button, push and release it immediately.

Holding the reset button for few more seconds and releasing it will restore the router to its factory default settings

The lights present on the router begin to blink.

Wait until the light on the router turns solid.

When the lights turn solid, it indicates that Reset Belkin Router has been completed.