SIMPLE GUIDE FOR HOW TO RESET AT&T ROUTER
To restore the factory settings on your AT&T router, perform a factory reset using How to reset AT&T router. Performing a factory reset deletes your custom settings. Before you start the process, note the static IP address, SSID, and password of your router. After resetting, you can customize the settings accordingly. If your problem is not resolved, launch the router’s web-based setup page and go with the prompts appearing on the screen to fix the problem. You can either do a hard reset or reboot your router to restore the AT&T router’s factory defaults.
Reset AT&T Wireless Router
Switch off the router by pressing the Power button and follow How to reset AT&T router.
Wait for two minutes and press the Power button to turn the router back on.
Once the device has initialized, the LED lights will turn green.
If it did not happen, locate the Reset button on your AT&T modem.
The location of the Reset button varies for different models.
Take a sharp tool like a paper clip and insert it into the Reset unit.
Hold it for a few seconds by using the paper clip and then release it.
Now your AT&T router reboots.
- http://192.168.0.1 in the URL bar for Reset AT&T Wireless Router.
Launch a web browser like Internet Explorer on your computer and type
Change the router's default settings according to your requirement.
How to Restart and Factory Reset your Gateway AT&T
Unplug the power cord from your computer and router to switch it off.
If your gateway or manual has an internal bAT&Tery, remove it from the slot.
Disconnect the telephone cord from the gateway and wait for thirty seconds.
Ensure that the front panel lights are powered off.
Fix the telephone cord back into the router or gateway.
Install the internal bAT&Tery into its slot.
Press the Power button to switch on your AT&T gateway.
Wait until the DSL light on the gateway turns green.
Turn on your computer and connect it to the gateway router.
To reset your AT&T gateway, take a paper clip and straighten it.
Power off the gateway router by pushing the Power button.
Search for the Reset button on your router. The location of the Reset button varies depending on the model.
Now insert the pointing tip of the paper clip into the Reset hole.
Press and hold the Reset button for a few seconds and then release it while doing How to reset AT&T router steps.
Your AT&T gateway reboots.
- http://192.168.0.1 in the address bar.
Open Google Chrome on your computer and enter
A login page displays on the screen. Type the username and password in the respective fields.
The default username is Username and the password is password.
Log in to the setup page and change the settings accordingly.
Access AT&T Router Settings?
To access the AT&T router settings, you need to take a note of the router’s username and password. Open a web browser and enter the router’s IP address in the address bar to open the setup page.
Power on your computer and AT&T router.
- Router Settings.
Now, position the computer closer to the router to Access AT&T
Connect the computer to the AT&T router’s network.
Launch a web browser like Google Chrome or Mozilla Firefox.
In the URL field, enter 192.168.1.254 to log in to the Web-based setup page.
Type the network’s password and click Submit.
Select the Wireless tab and you can change the settings to Access AT&T Router Settings.
You can change the required settings and click the Save Settings menu. To reset follow How to reset AT&T router guide.
The changes will be saved only when you select the Save menu.
You can also login to the router’s setup page from any device.
Reset my AT&T DSL Password
Resetting the password of the AT&T router periodically can safeguard your network connection by following Reset AT&T Wireless Router. To do it, go to the AT&T setup page and select the Update Now tab.
Turn on your computer and connect it to your AT&T router’s network.
On your computer, open any web browser like Google Chrome or Mozilla Firefox to Reset my AT&T DSL Password.
Enter your router’s IP address in the URL field and press the Enter key.
Fill in your Member ID in the respective field and select Continue.
Answer the prompting Security Questions and select Continue.
The current DSL password displays on the screen.
Click Reset to get a new system-generated password.
If you want to customize the password, go to the Gateway Settings.
Click Advanced and type your Device Access Code pasted on the bottom or side of your modem.
Select Continue and click Connection Configuration to Reset my AT&T DSL Password.
Check whether your User ID is correct.
Enter your new DSL password in the respective field.
Retype your new password in the corresponding field.
How do I Reset my AT&T Modem?
Power off your AT&T router if it is already On.
Wait for some time and press the Power button to turn it on.
After your router is initialized, the LED lights will glow steadily.
If this process did not resolve the problem, you could do a hard reset for Reset AT&T Wireless Router.
Search for the Reset button on your modem.
Take a sharp tool like a paper clip and insert it into the hole of the reset slot.
Hold the button for some time and then release it by following How do I Reset my AT&T Modem.
After a few seconds, your AT&T router will reboot.
Now, all the customized settings will be erased on your router.
You can launch the modem’s setup page to change the settings.
How do I Reset my Wifi Router?
Disconnect both your router and modem from the power supply.
Wait for some time and plug the modem back into the power supply.
Wait for 60 seconds and power on the router by pressing the Power button by same as How to reset AT&T router.
Now, wait for the router to restart. Check whether the problem prevails.
If you face the same problem, you can use a paper clip to press the Reset button. Locate the Reset button on your router.
The position of the Reset button changes for different routers.
Insert the paper clip into the Reset hole and wait for 20 seconds.
Your Wi-Fi router will restore its default settings while doing How do I Reset my Wifi Router.
To customize the Wi-Fi router’s settings, launch the setup page.
Change the settings and click Save.
How do I Reset my Broadband Connection?
Once you press the Reset button, all the customized settings on your router get erased same can be use while following How to reset AT&T router.
You need to note down some modem settings before you reset it.
Any device which previously connected to your router gets disconnected.
- reset the broadband connection, press and hold the Reset button on it.
Continue to hold the button for 15 to 20 seconds while doing How do I Reset my Broadband Connection.
Release the Reset button when the lights on the modem start to blink.
Now, try to connect to your broadband network.
You will be prompted for account related information.
If the problem persists, you can power cycle the broadband connection.
How do you Reset your Wireless Router?
Turn on your computer and connect it to your wireless router.
On your computer, open a web browser like Google Chrome.
Enter the IP Address of the wireless router in the URL field and press the Enter key for Reset AT&T Wireless Router.
Now, a Login page will appear on the screen.
Enter the Username & password and click Login to launch the setup page.
Select the Administration tab and then click the Factory Defaults menu.
- Restore Factory Defaults tab under the Factory Defaults section.
After resetting your Wireless router, reconfigure it with the new settings.
Change the router’s password and click Save Settings while doing How do you Reset your Wireless Router.
If you are unable to launch the Setup page, locate the Reset button on the router.
Take a sharp tool like a paper clip and insert it into the Reset hole.
Press and hold the Reset button for 5 to 10 seconds.
Restart your router after the reset process is successful by same as How to reset AT&T router.