EFFECTIVE WAYS FOR HOW TO INSTALL TP-LINK WIFI EXTENDER
The easiest method for how to install TP-Link WiFi Extender is by following the WPS button method. It is a handy device that doesn’t require any additional cables to enable power supply. During the setup process, you need to place the extender next to your host router. Insert the cords of the extender into an electrical outlet and wait for the LED to turn on. A round WPS button on your host router will help you establish the connection if you hold it for a few seconds. Make sure you press the button named WPS on your extender within two minutes. The LED turns blue indicating a successful connection. Now place the extender within the router’s range and start using the extended Wi-Fi service.
- Install Wifi Extender TP-LINK
TP-LINK Wifi Extender Installation
The following procedure will assist you in installing the TP-Link Wi-Fi Extender.
If you are installing the extender for the first time, then unwrap them carefully before you plug them into an electric socket.
Now establish a wired connection between the extender and the computer via an Ethernet cable while following how to install TP-Link WiFi Extender.
- http://192.168.0.254 web page.
Choose the Quick Setup tab and click the Next button for TP-LINK Wifi Extender Installation.
Select the region where you live and move to the next screen.
- complete router setup.
From the list of wireless network displayed, select yours and tap Next to
Specify the WEP key when prompted.
For an extensive wireless network, select Copy from the main router option, else choose the Customize option.
How to Configure TP-Link Range Extender
To improve the performance of the TP-Link router, place it between the device and wireless router.
Ensure that no obstacles are surrounding the TP-Link range extender.
To set up the range extender, connect the DSL modem to the router using an Ethernet cable.
Plug the extender to a standard wall socket and connect your devices to the extender wirelessly.
- http://tplinkrepeater.net in the address bar to launch the TP-Link Extender configuration utility.
Now, open a web browser like Safari or Google Chrome and type
A login window will appear on the screen.
- username & password in the respective fields. Click the OK button and you will notice the Quick Setup Start page.
Click the Next button and select your region. Select the Next button to start the setup by following how to install TP-Link WiFi Extender.
Now the device will look for the existing networks. This may take a while.
A list of active networks will be displayed on the screen. Click the checkbox next to your network’s SSID and select Next while doing How to Configure TP-Link Range Extender.
A Wireless Settings page will appear on the screen. Enter your host wireless network’s password and name of the range extender in the respective fields.
- TP-LINK Wifi Extender Installation.
Click the Next button and verify your network settings and wireless settings. After changing the necessary settings, select Finish to complete the setup for
If you have made any error, click Back to revert to the previous screen. Now the TP-Link range extender starts to update the settings. Wait until the process completes. You will get a Successful message once the process is complete.
Now you can change the necessary settings for your TP-Link extender.
How to configure my Range Extender via WPS button to Extend an Existing Wireless Network’s Coverage?
Connect your TP-Link Range Extender into a wall socket and place it close to the host router.
Now, search for the WPS button on the host router.
Once you locate the button, push it to establish a connection between the router and extender.
Look for the WPS button on the TP-Link Range Extender.
Press the WPS button on the range extender.
Make sure that you press it within two minutes from pressing the button on your router.
After you press the WPS button on both the router and extender, the WPS light should blink on the router.
If the light is not flashing, press the WPS button again.
The entire process may take up to 4 minutes.
Now, check if the Wireless light on the range extender is flashing.
If so, then the TP-Link range extender is installed successfully.
If the Wireless light is not flashing, repeat the process.
How to Setup a TP-LINK Wifi-N Wall Plug Range Extenders
The guidelines specified here will help you set up your TP-Link wall plug range extenders easily.
- Web Configuration Utility page of the router.
The initial step is to navigate to the
Go to the browser’s address bar and key the IP address of the TP-Link extender.
In the Login window, enter Admin as the username and password.
Once you log in, the Quick Setup page will appear. Tap Next.
Select your Region/Country and click next.
The device will start searching for the list of available networks.
Choose your main wireless network and enter the correct credentials when prompted.
On the Wireless Settings page, change the name of the extender if required to keep it default while following how to install TP-Link WiFi Extender.
Tap the Next button and verify your wireless settings on the next page.
Select the Finish option once you finish checking.
Wait until the modified settings are applied.
Your Tp-Link Wi-Fi Wall plug Extender is now set up.
How to Setup TP-LINK Range Extender Using the WPS Method
Make use of the steps given below to configure the TP-Link Range Extender with the help of the WPS method.
Unpack your range extender after you purchase it.
Next, press the WPS button that is available on your router and press the WPS button present on the repeater.
Once you push the WPS button the router, you should press the WPS button of the extender within two minutes for TP-LINK Wifi Extender Installation.
- Tp-link extender setup process will fail.
If you do not do so, then the
The WPS light present on the router and extender should blink after successful connection while following how to install TP-Link WiFi Extender.
If they do not blink, then redo the setup procedure.
After 2 minutes, you should check the Wireless LED of the extender to verify if it is connected.
Now, you can change the position of the TP-Link range extender and start connecting devices to it.
How do I Log Into My TP Link Range Extender?
Before you begin to log into the TP-link, make sure that you have assigned a static IP address to your computer.
If you haven’t done it before, then follow How do I Log Into My TP Link Range Extender steps given below
Connect the computer and the TP-link port using an Ethernet cable.
- click Start --> Control Panel --> Network & Internet --> Networking & Sharing Center ---> Change Adapter Settings
On your system,
Now, go to Properties by right-clicking the Local Area Connection
Double-tap Internet Protocol Version 4 (TCP/IPv4), set a static IP address, and click the OK button
On your system, open a browser, and type the URL code in the entry field
Click Enter. When prompted, type the username and password and click Log in
In most cases, the username & the password will be in small letters.
After entering the details, click OK.
TP-link home page shows up on the screen while following How do I Log Into My TP Link Range Extender.
You can edit your required section in this section.
How do I Reset My TP Link Wi-Fi Extender?
To reset the Wi-Fi extender, proceed with the instructions mentioned below.
A reset button is located underneath the device.
Keep the repeater turned on.
Use a pointed object to press the Reset button.
Hold the button for at least 3 to 5 seconds. The Lights on the device start to blink.
After a while, each light remains stable.
It indicates that the settings on the repeater are restored to the defaults.
After a while, the device begins to establish a connection with the network.
TP-link Extender Won't Connect
If the TP-Link extender is not connecting to the router, try to configure the device again.
- establish the connection to fix TP-link Extender Won't Connect.
Use the WPS method to
Insert the device into a power outlet near the router after TP-LINK Wifi Extender Installation.
A WPS button is available on the repeater. Press it to begin the connection process.
When the repeater tries to detect the network, do not power it off.
If the frequency of the signal is proper, a green light displays on the front panel of the extender.
If the signal frequency is bad, a red light displays on the panel.
Based on the signal frequency, move the device closer to the router.
If connecting the repeater to the network is not possible, move the device to an appropriate location to fix TP-link Extender Won't Connect.
It should be placed in a location between the router and the dead zone.
The last resort to the issue is resetting the repeater and performing the configuration using how to install TP-Link WiFi Extender process.