- Edimax BR 6428nS Installation
Installing an Edimax router is very simple than you think. If you want to know how to Edimax BR 6428nS for the first time, proceed with the quick steps given below.
Steps To Know
Unpack your router product box and take out the supplies such as Ethernet cable, CD-ROM, power adapter, and Quick installation guide.
Using the supplied Ethernet cable, connect your Windows computer to the router.
The supplied Ethernet cable should be connected to the router’s LAN port and computer’s Ethernet port.
After verifying that you have connected them properly using the Ethernet cable, connect the power adapter that came with your router to an electrical outlet.
Turn on the router and wait until the power LED is lit.
On your computer, open the default browser and navigate to the Edimax setup page.
Click the Get Started button to begin the setup process of your Edimax router.
Choose how you wish to use the router from the displayed options.
Finish the setup by following the on-screen prompts.
Next, open the browser-based configuration interface by entering your router’s IP address in the URL field.
You can identify your router’s IP address on the router label.
Alternatively, you can identify it using the ‘ipconfig’ command in the Command Prompt app. But you have to run it with administrator rights.
The IP address of your router will be displayed near the Default Gateway field.
Using the router’s IP address, you can open the login portal of your Edimax router.
Enter ‘admin’ in the User name field and ‘1234’ in the Password field to access the administrative interface.
Click the Setup Wizard tab from the left-side panel and run the setup wizard to configure the wireless network settings.
Finally, make sure to save the configured settings by clicking the Save button.
Now, you have completed the steps to install Edimax BR 6428nS.