How To Install Edimax Br 6208acd Router?

How To Install Edimax Br 6208acd Router

The quick installation steps for the Edimax BR6208ACD router are given here. Before starting to install the router, check whether all the listed contents (Antenna x3, BR-6208ACD, Ethernet cable, Power Adapter, CD-ROM, and quick installation guide) are present in the package. The router has a Power, Internet, 2.4GHz Wi-Fi, and 5GHz Wi-Fi LED light. The device’s back panel has a Reset/WPS button, Power Port, Internet/WAN Port, LAN Ports 1-4, Wireless Radio ON/OFF Switch, 2.4GHz Antenna, 5GHz Antenna, and 2.4GHz Antenna. Now, start installing the Edimax BR6208ACD router using how to install edimax br 6208acd router instructions given on this site.

Quick Steps For Installation:

  • First, take the antennas and screw them to the back of the router. Remember to connect the two 2.4GHz antennas to the outside and the 5GHz antenna at the center. There will be a label attached to the base of each antenna with 2.4GHz or 5GHz.
  • Take the power adapter and connect its one end to an electrical socket. Connect the other end into the device’s DC power port.
  • Check if the Wi-Fi ON/OFF switch is kept ON. Also, verify if the three LED lights (Power, 2.4GHz, and 5GHz Wi-Fi) are ON.
  • Use a Wi-Fi device such as a tablet, computer, or Smartphone to locate the router’s Wi-Fi network using its SSID ‘edimax.setup’ or ‘edimax.setup5G’ and connect to it.
  • On using how to install edimax br 6208acd router guide, Open a web browser on your device. If the web browser’s screen displays Get Started as shown below, then tap on Get Started and begin the setup process. If not, enter the following URL, https://edimax.setup. Now, click on Get Started and then start the process.
  • Choose the option based on whether to use the Edimax BR6208ACD router in its default Wi-Fi router mode or in some other mode.
  • The five modes available on Edimax BR6208ACD are:
  • Wi-Fi Router Mode
  • Access Point Mode
  • Range Extender Mode
  • Wireless Bridge Mode
  • WISP Mode
  • Select any one of the above modes and follow the specific instructions provided below on this page.
  • After completing the specific prompts given for each mode, continue with the on-screen prompts to finish the Edimax BR6208ACD router setup.

Wi-Fi Router Mode:

If you select the Wi-Fi Router Mode option, then follow these steps.

  • Choose iQ Setup Wizard.
  • Take an Ethernet cable and connect it between the router’s blue Internet port and Modem’s LAN port. Then choose Next.
  • The router now tests the connection.
  • Tap on Next. Then configure the wireless network.
  • Enter the 2.4GHz & 5GHz wireless network’s name and password. Then tap on Next.
  • In the upcoming window, click on Next.
  • The router will save your settings.
  • At last on finishing how to install edimax br 6208acd router, a message stating that the setup is complete is displayed.

Now, the router has been set up and is ready for use.

Access Point Mode:

If you have chosen Access Point Mode, then follow these steps.

  • Choose the Access Point tab.
  • Connect the router’s yellow LAN port to another router’s LAN port using an Ethernet cable. Then tap on Next.
  • Choose either 5GHz or 2.4GHz wireless frequency or both.
  • Tap on Obtain an IP address automatically or Use the following IP address. If a static IP is used, type the IP address, default gateway, and subnet mask. Select Next and proceed with how to install edimax br 6208acd router manual.
  • Enter the name and password and tap on Next.
  • In the upcoming window, choose Next.
  • The router will be ready in some time.
  • Now, you can start using the router.

Range Extender Mode:

If the Range Extender mode is chosen, follow these steps.

  • Choose Range Extender and tap on Next.
  • Check if the router is within Wi-Fi range of your existing wireless router. Choose Next.
  • Select 5GHz or 2.4GHz wireless frequency or both. Click on Next.
  • Choose the Wi-Fi network name and select Next.
  • Enter the security key of the existing wireless network. Click on Next.
  • The router tests the wireless connection.
  • Choose Obtain an IP address automatically or Use the following IP address. If a static IP is used, enter the subnet mask, IP address, and default gateway. Select Next.
  • If both the options (2.4GHz and 5GHz wireless frequencies) are chosen, then repeat the how to install edimax br 6208acd router steps from 4 to 7 once again.
  • Check if all the details you have entered are correct and tap on Next.
  • The router will be ready in some time.

Wireless Bridge Mode:

  • Choose Wireless Bridge -> Next.
  • Check if the router is within the range of your existing wireless router. Choose Next.
  • Choose one of the options as your wireless frequency.
  • Choose the Wi-Fi network name (SSID). Select Next.
  • Enter the security key and choose Next.
  • The router tests the wireless connection.
  • Choose Obtain an IP address automatically or Use the Following IP address. Enter the IP address, subnet mask, and default gateway. Choose Next.
  • The configuration window will be displayed. Choose Next.
  • The router configured as bridge will be ready to use.

WISP Mode:

  • Choose WISP -> Next.
  • Before proceeding with how to install edimax br 6208acd router manual, Make sure the router is within the range of the WISP network. Choose Next.
  • Select iQ Setup Wizard.
  • Choose the required Wireless Frequency (2.4GHz or 5GHz).
  • Click on WISP SSID -> Next.
  • Enter the Security key and choose Next.
  • The router tests the wireless connection. Tap Next -> Next.
  • Enter the wireless network name and password. Choose Next.
  • In the upcoming window, tap on Next.
  • The router will be ready to use.

If you need assistance more assistance on how to install edimax br 6208acd router, click the CALL button.