Quick steps for How to Hook Up Linksys Wifi Extender
The Linksys Wi-Fi extender is a device that broadcasts signals to a wide area. You need to place the device in the center so that it extends its signals. Use the steps below to know how to hook up Linksys WiFi extender to a router.
Launch the browser on your mobile or computer. Move the pointer over the address bar and click on it, and then type either 192.168.1.1 or http://extender.linksys.com. Start searching by pressing the Enter key on your keyboard for Linksys Extender Setup Re7000.
Click Start Setup. Now the Linksys network setup page displays a message on the screen. Read it and click the Accept option.
Type a new admin password and a password hint to remember the password. Once you have entered the admin password. Click the Save tab to save the password and hint for Linksys Extender Setup Re7000.
When the How do you want to use your range extender? the web page opens, click the As a Wireless Range Extender option and then select Next.
Now the extender starts searching for all available routers. Hover over your router network's SSID and click on it.
Note: In case of using a dual-band router, you can see two network bands while doing How to Connect Linksys wifi extender.
Once you have clicked on the unique network SSID, enter the default password to connect to it.
Linksys Extender Reset
If you cannot access the web-based setup page for your Linksys range extender or have failed to remember the password of your router, do the following.
Locate the Reset button on the Linksys range extender.
Press and hold it for 10 to 12 seconds for Linksys Extender Reset.
Check if the Power LED light blinks continuously while pressing the Reset button this indicates that the Linksys Extender resets to its factory settings.
When you reset the extenders password, all your factory data settings will restore to default.
You can use admin as the username and password to login to the web-based setup page for Linksys Extender Reset.
If you can't to sign in to the web-based setup, locate and click the Factory Defaults option to restore the settings to default.
How Do I Setup My Linksys Wifi Extender Re6800?
Provide power supply to the Linksys RE6800 Range Extender after connecting a power cord between the extender and wall outlet.
Link your network router to the internet using a modem, LAN or DSL connection. Make sure that the router broadcasts the Wi-Fi in a specific area.
Place the Linksys Wi-Fi Range Extender in a spot where at least 50% of router's signal is present.
If you place the extender too close or farther from the router, there might be some connection issues by following How Do I Setup My Linksys Wifi Extender Re6800.
Find the WPS button on your Linksys RE6800 Wi-Fi range extender and click on it. Now the LED light near the WPS button starts blinking; this indicates that the extender searches for a nearby network with good signal strength.
Within 120 seconds, press the WPS button. Now the Linksys extender finds the router signal and connects to it.
When the Linksys RE6800 Range Extender is connected to the network, the LED light near the WPS stops blinking. This indicates that the network connection is done correctly.
If you could not set up using the Wi-Fi Protected Setup method, then connect to the web-based setup page and the router's network.
How Do I Reset My Linksys Range Extender?
If you are facing connection problems in linking your Linksys extender to the router's network by following how to hook up Linksys WiFi extender to router, or if you have any other issues, try resetting your extender setting to default.
To reset your Linksys Range extender via a web-based setup page, search for it on your web browser.
If you like to open the web-based setup page on a Mac computer, use the Safari or Firefox browser.
Type the IP address and click the Return button. The default IP address to connect to web-based setup page is 192.168.1.1.
When the web page prompts you to enter the Username and Password, enter it and click Log in FOR How Do I Reset My Linksys Range Extender.
Click on the Administration tab, and locate the Factory Defaults tab, and then select it while proceeding How to Connect Linksys wifi extender
Choose the Restore Factory Defaults buttons under the Factory Defaults section for linksys extender setup.
Now all the factory settings of your Linksys range extender resets to default.
If this method does not work, you could not log in to the Linksys web-based setup page, and then locate the Reset button on your extender.
Keep pressing the Reset button for 10 seconds to reset all the settings to default.
Can You Connect An Ethernet Cable To a Wifi Extender?
So how to hook up Linksys WiFi extender to router. And to setup the Wi-Fi extender using an Ethernet cable, follow the simple steps provided below:
Plug the router's power cord to a power outlet. Turn on the router.
Connect the router to the modem by using an Ethernet cable.
Place the Wi-Fi range extender close to the network router.
Connect the Wi-Fi range extender into a power outlet. If the extender does not turn on automatically, press the On/Off switch.
Now the LED near the On/Off switch starts blinking.