How To Enable Ipv6 On Router?

How To Enable Ipv6 On Router?

Internet Protocol IPv6 is an advanced version of IPv4 introduced to solve the IP address problem. Many userspeople widely use IPv6 for its reliability and efficiency. So, let us see how to enable IPv6 on router. For example, let's have a look at the Linksys routers. Most of the Linksys routers supports IPv6.

You Can Manually Enable It In Two Simple Ways. They Are:

  • The web-based setup page method
  • Cloud account method

You can enable it by choosing anyone of the above methods. Using the web-based setup page for enabling IPv6 on your router doesn't take much of your time. Launch a web browser on your Windows computer and then type your router's IP address in the address bar. Hit the Enter key. The login page opens now.

How To Configure Ipv6 On Router?

On this login page, enter the login credentials to log in to your router's web interface.

  • Now, navigate to the IPv6 Setup sub-tab.
  • Note: If you do not find the IPv6 Setup sub-tab, update the firmware of your router.
  • You'll find the Internet Connection Type section. In that section, deselect the Disabled option.

Read the below steps to know more on how to enable ipv6 on router.

Steps To Enable Ipv6 On Router
  • It opens the 6rd Tunnel section.
  • Choose Manual Configuration from the drop-down menu. Now, type the required details, such as Prefix, Prefix length, or Border Relay.
  • Cross-check the details that you've entered.
  • Lastly, click Save Settings. IPv6 is now enabled.
Quick Steps To Enable Ipv6 On Router

Otherwise, you can choose to use the Linksys cloud account method to enable IPv6 on your router. Here's how to do it.

  • Access your Linksys cloud account either bylocally or remotely.
  • On the Linksys Smart Wi-Fi home page, select Connectivity under the Router Settings section.
  • From there, click Internet Settings. Now, click the IPv6 link and then select Edit.
  • Select the Enabled checkbox. It enables the 6rd tunnel option. Now, select Manual from the drop-down menu. Type the required details and then select Apply.
  • Finally, click OK.

Now you've seen how to enable IPv6 on router. Hopefully, the information was helpful. Reach us by clicking the call button for more assistance.