How To Connect Sprint Airave To Wireless Router
Airave works similar to a cell tower. It is a base station that enhances the voice and data cellular signals, especially for personal use. It links to the Sprint’s network via a broadband connection. It makes use of your broadband internet connection via DSL, cable, and similar devices to carry the voice services, i.e., to connect to the mobile operator’s network. The access to this device is limited to 50 phone numbers only. For the network synchronization and device location information, the Sprint Airave uses the Global Positioning System (GPS). The CMDA encoding and the 3DES encryption security standards are used for security purpose let's see the steps to follow how to connect sprint airave to wireless router. A dual tone on your wireless phone will appear shortly before making and receiving calls, indicating that you are within the range of AIRAVE.
- How does Sprint Airave Works
Connect Sprint Phone to Airave
Connecting your phone to the Airave is very simple. You need to configure the AIRAVE router and set a password. Enable the AIRAVE network on your phone and start using it.
Start the necessary setup procedure by connecting the device with your network via an Ethernet cable by following how to connect sprint airave to wireless router’s.
Make sure to position the external GPS antenna correctly.
Provide power supply to your device.
Now, connect your PC to the unit and start configuring it.
Open the configuration page of the AIRAVE using the IP address specified in the user documentation.
Select the Wi-Fi option on the home page.
Locate the Basic Settings option and click them.
Note the SSID mentioned on the page. You can also modify it if required.
Once the configuration is done, get the phone in which you want to enable the AIRAVE feature.
Go to the settings segment in your phone and locate the Wireless settings.
Turn on your Wi-Fi, and the device will start searching for the available networks.
The SSID of your AIRAVE appears on the screen. Locate and select it.
Your phone is now enabled with the AIRAVE feature for Connect Sprint Phone to Airave.
Subscribe to your preferred plan and start enjoying the services.
You can also check if your phone is within the range of AIRAVE.
Maximum of fifty phone numbers can be added in the available user list. To create the list, you need to contact the support team of the manufacturer.
You can reset the router to restore the factory default settings. However, resetting the router erases the customized settings that were set previously.
How to Connect Wireless Router to Wifi?
- configure the router via Ethernet connection to enable Wi-Fi services on the device.
You have to
Go to the configuration page of the router by following How to Connect Wireless Router to Wifi.
You need to specify the login information to enter the settings page.
The default username and password will be mentioned in the label attached to your router for Connect Sprint Phone to Airave.
Once you are into the Settings page, click the Wireless tab, and the related options display on the screen.
In case you are configuring the router for the first time, then modify the Wireless mode, SSID, channel and set the passkey for your Wi-Fi network.
This will put your router on the Wi-Fi mode.
You can start connecting your devices like phone, printer, computer, and many more to the router via Wi-Fi network.
To connect your second router to the Wi-Fi network, configure the device with the wireless settings options of the first router.
How to Connect to Wireless Modem?
Go through the procedure given below to know how to connect your wireless modem to the Sprint AIRAVE.
Make sure you keep the AIRAVE next to an exterior window and near to the wireless modem.
Link the LAN port of the wireless modem and the WAN port of the AIRAVE using the yellow Ethernet cable supplied along with your device.
Ensure that you provide power supply to the SPRINT AIRAVE.
Wait until the light on the device starts blinking, indicating a successful connection while doing how to connect sprint airave to wireless router.
The Wireless modem is now connected to your AIRAVE device by following How to Connect to Wireless Modem.
If the broadband light blinks slowly, you need to check your internet connection.
Make sure the DHCP setting is enabled on your modem.
Else, add the ISP username and the password to connect AIRAVE to the internet.
How to Connect Multiple Wireless Routers?
In case the DSL or cable modem has an integrated router, clashes may occur within the AIRAVE’s router. Then you need to change the IP address of the AIRAVE router to keep both routers active in connection.
Connect your system to the home router’s LAN port.
Open a web browser and go to the router’s configuration page.
Examine the router status to know its IP address. If the range conflicts with your AIRAVE router and then proceed with the following steps for Connect Sprint Phone to Airave.
Link the PC and the AIRAVE’s router via an Ethernet cable.
Select the Advanced tab on the configuration page of the router by following how to connect sprint airave to wireless router.
- advanced settings.Choose the LAN IP Setup tab in the
Modify the values in the third box of the LAN IP Setup.
Navigate to the User Router as DHCP Server section and change the values in the last two boxes of the Starting IP Address and the Ending IP Address section.
Locate the Apply option and click it to save the changes made.
Reboot your system to implement the changes in the IP address.
Now you can connect multiple routers irrespective of the difference in their IP addresses.
Connect Sprint Airave to wireless Router
Sprint Airave helps in boosting your wireless voice and 3G data services. Before you start the installation of the device, ensure that you have the components given below.
External GPS Antenna Cable
Broadband Internet Access
Disconnect all the devices that are linked to your router and remove the cables connected to it. Be sure to place the Sprint Airave close to a window or an elevated position. If you are living in a large home, use the external GPS antenna to get uniform coverage throughout the house.
Connecting Sprint Airave to Wireless Router
Before you start the process, choose the appropriate location for placing Sprint Airave.
Disconnect all the cords connected to your DSL modem and router.
Get an Ethernet cable and connect its one terminal into your router.
Connect the other terminal into the LAN port of the Sprint Airave.
Reconnect the power cable of router and power it up.
Connect one terminal of the external GPS antenna cable into the external GPS adapter.
Fix the other end into the corresponding port available on Sprint Airave.
If possible, place the GPS Antenna close to a window that is shut.
Wait until the GPS LED light flashes green.
When the Network, GPS, Mobile, and Broadband LED lights have stopped blinking, the Sprint Airave is ready to use.
Setup Instructions for Airave Behind a Router
Before you start the process, get a power cord, Ethernet cable, and external GPS Antenna cable. Choose an appropriate location to place the Sprint Airave base station. You can place it near a window or an elevated location.
Now, disconnect the cables from the router and power it off. Connect one terminal of an Ethernet cable into the router.
Connect the other terminal of the cable into the WAN port available at the Sprint Airave base station. Now, reconnect the cable to your router and then power it on.
Plug the power cord from the Airave base station into the wall outlet and switch it on. Now, connect one end of the external GPS antenna cable into the external GPS adapter.
Connect the other terminal of the antenna into the port available at the Sprint Airave base station. Make sure that you place the GPS antenna on a flat surface nearby a closed window.
Wait for at least 30 minutes for the GPS LED light to turn solid green. Now you can connect your PC and LAN router to the Airave’s LAN ports to Connect Sprint Phone to Airave.
The lights on the Airave will flash as the router initializes and connects to the base station while following how to connect sprint airave to wireless router.
Wait for the Mobile, Network, GPS, and Broadband LED lights to stop blinking on your Airave. This might take up to two hours.
Once the LED lights on the Airave have turned solid and a steady green light appears, you can check the connection.
From any phone, dial *99 and you will hear a message saying ‘ You are now within Airave coverage.’
If you are within the range of the Airave, you will hear three beeps when answering a phone.
Sprint Airave not Connecting
To solve the problem, unplug all the cables and power cords from the Airave device, router, and modem.
Wait for some time and connect the Ethernet cable into the router and Airave base station.
Connect the GPS antenna cable into the respective ports. Connect the power cable back into the Sprint Airave base station and power it on using how to connect sprint airave to wireless router guide.
- sprint airave not connecting.
Now, try using your Airave. If the issue persists, reset the device to fix
- Connect Sprint Phone to Airave.
Locate the Reset button on the Airave base station to
Use a paper clip or a sharp tool to press the Reset button.
Long-press the Reset button on the Airave for at least 15 to 20 seconds.
Wait for 30 to 45 minutes for the Reset process to complete to fix sprint airave not connecting.
Now, try using your Airave base station.
If the error prevails, go through the Technical and Troubleshooting Guide given in the shipment package to solve the problem.
How to Setup Airave Sprint
Sprint Airave boosts the signal for your wireless voice and 3G data services.
- How to Setup Airave Sprint process.
Gather an Ethernet cable and the external GPS Antenna cable before you start
Disconnect all the cords from the router and power it off.
Now, plug one end of the Ethernet cable into the router.
Connect the other terminal of the Ethernet cable into the WAN port available on the Airave base station.
Reconnect the power cable into the router and power it on.
Fix the power supply connector into the Airave and turn it on.
Attach the GPS antenna into the GPS port on Airave by following How to Setup Airave Sprint.
Place the GPS antenna in a flat surface, preferably near a closed window.
Wait for the GPS LED light to become solid green.
Once the Network, Mobile, GPS, and Broadband LED lights have stopped blinking, your Airave is ready to use.
The how to connect sprint airave to wireless router entire process might take up to two hours.