The Canon G3000 printer is an All-in-One wireless printer that supports the Canon PRINT Inkjet/SELPHY and PIXMA Cloud Link mobile printing software. The features of the Canon G3000 printer are listed below for your reference.
High page yield ink bottles
Integrated ink tank system
Quality photo and document printing
Print Wirelessly
Access point mode
Mobile and cloud printing
To connect the Canon G3000 printer to a wireless router using the WPS Connection method, carry out the simple procedure given on this web page.
Find the Wi-Fi button on the operation panel of the Canon G3000 printer and then hold it until the ON LED starts to blink.
After pressing the Black button, press the Wi-Fi button on the printer’s operation panel.
Check if the Wi-Fi LED starts to blink quickly. Ensure that the ON LED must stay lit.
Go to your wireless router, search for the WPS button and press it.
Make sure to hold the WPS button on the wireless router within two minutes.
Check if both the Wi-Fi and ON LEDs are lit.
This ensures that the wireless network connection is successful on the Canon G3000 printer.
Once done, you can connect the printer to your computer as per the following simple instructions.
Download the printer driver from the official Canon website.
Install the Canon G3000 printer driver on your computer by performing the on-screen prompts.
Note: You can also use an installation CD to install the printer driver.
At the time of the Canon G3000 printer driver installation on the computer, choose the Wireless Network option to set the connection type.
You will see the completed message on the screen if the printer driver installation gets over.
This will connect the Canon G300 printer to the computer.