SIMPLE GUIDE FOR HOW TO CONFIGURE TP-LINK WI-FI RANGE EXTENDER
How to configure TP-Link Wi-Fi range extender, plug the device into an electrical source. Visit the Settings page of the device by using the IP address mentioned on the label of the extender. Specify the default login credentials to enter the Home page. Select the region and proceed to configure the Wireless Settings. Make sure that you alter the changes for both 2.4 and 5GHz bands. Remember that the extender settings match that of the router. Once you complete the configuration, re-select your network from the desktop to reboot your device. Check the connectivity by opening a site on your browser.
- TP-Link Wifi Range Extender Configuration
TP-Link Wifi Range Extender Setup
Plug the TP-Link Wi-Fi range extender into the power source.
Locate the Wi-Fi button on the desktop and click on it while proceeding How to configure TP-Link Wi-Fi range extender.
From the list of network sources, identify the TP-Link extender, and select it.
Though your PC links with the network, you cannot access them until the configuration is done.
Launch the Settings page and click the button Next.
Tap Region from the drop-down list and proceed to the next screen.
Select the name of the 2.4GHz band of your router and configure the settings.
Enable the Copy From Main Router Radio button under the Range Extender Network heading.
Repeat the steps for the 5GHz network band also.
The next screen will display the changes that you have made for verification.
Select the Next button and wait until the rebooting process is over to complete the TP-Link Wifi Range Extender Setup.
How to Setup a Linksys Router as a Wireless Repeater?
Place the repeater within the range of the network signal.
- connect it to your router.
A Linksys repeater does not require a wired connection to
Use a wireless network to connect your device to the host router.
Launch a search engine of your choice and enter 192.168.1.1 in the URL bar of the browser.
Specify the password as admin in the text-box and click the OK button.
Locate the Wireless option from the page and select it while following How to configure TP-Link Wi-Fi range extender.
The next screen will display options related to the wireless settings.
Note the Service Set Identifier, the channel on which the router is functioning and the Network Mode.
Select the Wireless Security tab and note the details like encryption method & pre-shared key of the Security Mode.
Enable a Wired connection between your PC and the Linksys repeater.
Launch the Control Panel from the Start Menu and select Network and Internet settings.
Launch the Network and Internet Sharing center and locate the left menu to select the Change Adapter Settings.
Click the Local Area Connection option twice.
Locate the Internet Protocol Version 4 option and double click it.
Mention the Default Gateway and the Subnet Mask of your network.
Now visit the Configuration page of your repeater and enter the details that you have noted from the router settings.
- Setup a Linksys Router as a Wireless Repeater.
Make sure that you have selected the security mode as WPA or WEP as a repeater won’t support WPA2 by following How to
The other details of the repeater should match that of the host router.
Complete the TP-Link Wifi Range Extender Setup process by selecting the Save Settings option.
How to use a Linksys WAG200G as a Range Extender?
Go through the steps below to get to know how to use a Linksys WAG200G as a range extender.
Initially, enable a connection between your PC and router via a wired connection. An Ethernet cable is opted for this.
Launch your search engine and enter the IP address as 192.168.1.1 in the address bar.
Mention the login details and enter the Configuration page.
Visit the menu on the left side after selecting the Setup tab.
Choose the first option mentioned Internet Setup from the menu and do TP-Link Wifi Range Extender Setup.
Enable the Bridge Mode Only option from the Encapsulation drop down box.
Head to the Network Setup and change the Router’s IP address to match with your host router.
Switch from DHCP to the DHCP Relay option on the Network Address Server Settings.
Disable the wired connection between the PC and the Linksys router.
Link the WAG200G with your host router to extend your network connection.
TP-Link 300 Mbps Universal Wifi Range Extender Configuration
Before you begin the configuration process, it is necessary to turn on your Tp-Link 300 Mbps extender.
Wait until the light on the device remains idle and follow How to configure TP-Link Wi-Fi range extender.
- Tp-link wi-fi extender, then perform the Reset function.
If you are going to configure a new
Locate the tiny hole at the bottom of your device and use a pointed object to press and hold it for a few seconds.
Enter the IP address of your extender in the address bar of the web browser that you have launched.
Now mention the default login details in the dialog box that appears to enter the Configuration page.
Choose your preferred region from the drop-down list and proceed to the next screen. A list of networks displays on clicking the Wireless Settings tab.
Choose your network from the search results and set a password in the following screen.
Repeat the procedure for 5GHz band and click the button named Next on it.
The following screen let you to view the status of your router settings for verification. In case of any errors, get back to the Settings page and alter settings.
Selecting the Finish button will reboot your router and complete the configuration process.
TP-Link AC 750 Wifi Range Extender Configuration
To access the Tp-Link AC 750 Wi-Fi range extender’s configuration page, enter the manufacturer’s domain name in the address bar of your internet browser and follo How to configure TP-Link Wi-Fi range extender.
Enter the user name and the password as admin in the login window.
In the Quick Setup Start page, locate the Start button and click on it to go to the next screen.
The next page permits you to choose your region from the drop-down list.
At the bottom of the page is the Next button. Selecting it will direct you to the Wireless Settings.
Select the box prior to the SSID of your network from the list of the available 2.4GHz network.
Click the Rescan button if you cannot view your network name.
Mention the passkey of your main router and the SSID of your new extender.
In the next window, select your 5GHz wireless network name.
Perform the same process as of 2.4GHz network.
The details regarding the settings of your network are displayed once you complete 5GHz network configuration.
Check it twice and click the Finish button.
Wait until the configuration is complete.
TP-Link AC 1200 Wifi Range Extender Configuration
Configure the Tp-Link AC1200 Wi-Fi range extender after you complete the hardware installation process.
Entering the extender’s IP address on the browser will open a login dialog box where you need to specify the default username and password for authentication.
- Quick router Setup page is complete for TP-Link Wifi Range Extender Setup.
Wait until the scanning process on the
Select the SSID of your 2.4GHz router and mention the passkey below.
Now repeat the same for your 5GHz network.
In the Wireless Settings page, specify the SSID’s of your extender.
The next screen will display the network settings where you can verify the details for TP-Link AC 1200 Wifi Range Extender Configuration.
Click the Back button to edit the details or the Finish button to navigate to the next screen while following How to configure TP-Link Wi-Fi range extender.
Make sure you leave the page idle until the rebooting process is complete.
is a self-sustaining service provider that is not associated with any other companies. We specify the brand names for reference purpose only. Also, we are not accountable for the damages that occur due to the use of any third-party products or services.
Copyright © 2019 - 2020 | All rights are reserved