You can configure the TP-Link Wi-Fi Extender manually by using the WPS button or the Web Interface. After logging in successfully, you can start the Configuration process and manage the device. So, how to configure TP-Link Wifi extender Switch on the Wi-Fi Extender and your Router. Push the WPS button of the Router and then the TP-Link Wi-Fi Extender. The LED light on both devices has to blink. Wait for two minutes, and the lamp on it still blinks then the connection is successful. Now, you can place the Extender in a location where extensive network coverage is required and start using it.
Choose your network from the list and click the Next button.
Mention the Passkey when prompted to do TP-Link Wifi Extender Setup.
Select the Copy from Main Router or the Customize option, as per your requirement and click the Next button.
Review the Network Settings and click the Finish button.
How to Configure TP-Link Wi-fi Range Extender?
You can configure the TP-Link Wi-Fi Range Extender by using the WPS button or via the web-based management by using how to configure TP-Link Wifi extender.
WPS Method to Configure TP-Link Wi-fi Range Extender
The WPS method is applicable only if your Router and your Range Extender has a WPS button.
WPS permits you to configure your Network safely and securely automatically.
Plug in both the devices into a power outlet and make sure you place them close enough.
Check if there is any physical button present on your Router labeled WPS.
Press and hold the WPS button located on your Router. Release the button when a tiny LED light on the device blinks.
If you are not able to see the light blinking, press it again.
Press the WPS button on the TP-Link Wi-Fi Range Extender within two minutes of releasing the button on your Router.
The light on the Extender also blinks. The light's color depends on the Router you use.
If the light on the device blinks even after two minutes, it indicates a successful configuration.
If the Range Extender is still off after the two-minute window, then the WPS process fails.
Repeat the WPS operation several times and check for the connection.
This method doesn't require any manual configuration on your TP-Link Extender.
Position the Extender in an area that receives a strong signal from the Router while following how to configure TP-Link Wifi extender.
Connect your Wireless device to the Network using the SSID and the Wi-Fi password information located in the Configuration Note.
TP-Link 300Mbps Universal Wi-fi Range Extender Configuration
Make sure you perform the Reset function to restore the device to factory default settings before you begin the configuration process.
Detect the Reset button at the back of your TP-Link 300Mbps Universal Wi-Fi Range Extender.
Use a sharp pointed object to press the button for few seconds, and the light starts flashing on the device.
Choose Wired or Wireless connection for the configuration process. Using an Ethernet Cable is preferred.
Make sure you disconnect the Computer from all the other Wireless Networks before you connect it to your Wi-Fi Extender using an Ethernet Cable.
On your Windows PC, move the cursor to the bottom left corner of the screen to display the list of available Wi-Fi networks.
Select the TP-Link WiFi Extender Setup network to link other routers to the extender from the list.
Visit the manufacturer's website and enter the Login Credentials.
Choose the Region and click the Next button.
Select your Wireless Network and enter the existing Wi-Fi password.
Click Finish to apply your settings and save them to complete TP-Link 300Mbps Universal Wi-fi Range Extender Configuration.
TP-Link TL-WA850RE 300Mbps Universal Wi-fi Range Extender Configuration
Go with the below mentioned process to configure your TL-WA850RE to extend the existing wireless network's coverage via the web interface.
Verify the Hardware connection before you begin to configure the Extender.
Plug the TL-WA850RE extender into an electric socket and place it near your Router.
The manufacturer recommends configuring your device via a Wired Connection. Hence connect the instrument to your PC using an Ethernet Cable.
Log in to the Extender on your browser by typing http://192.168.0.254 in the URL bar.
Mention the username and the Password as admin in lower case.
Go with the Quick Setup mode and click the Next button to choose your Region.
The TL-WA850RE extender will start to scan for available wireless networks in its surrounding.
Select the Wireless Network that you want to extend from the list and click the Next button.
Specify the password of your Network and click the Finish button to complete TP-Link TL-WA850RE 300Mbps Universal Wi-fi Range Extender Configuration.
TP-Link AC750 Wi-fi Range Extender Configuration
The steps below will aid in configuring the TP-Link AC750 Wi-Fi Range Extender via the web-based utility easily
Enter the manufacturer's domain name in the address bar of the browser.
Specify the Login Credentials in the pop-up window.
Uncheck the Using Proxy option in the LAN Settings if the pop-up window doesn't appear.
On the Quick Setup Start page, select your Region for TP-Link AC750 Wi-fi Range Extender Configuration.
Wait until the device detects the existing network.
Initially, the 2.4GHz wireless network list appears.
Select your network and enter the password while following how to configure TP-Link Wifi extender.
Next, configure the settings for a 5 GHz wireless network. If you do not want to use them, then skip this step.
To manually configure the Wireless Settings for TP-Link Wifi Extender Setup, check the Set SSID and MAC Manually option.
Check the Settings twice and click the Finish button to apply your changes.
TP-link Extender Ac1200 Setup
Plug the AC1200 Wi-Fi Range Extender into a power outlet. Make sure you place them near your host Router.
Wait until the Power LED flashes.
Use the WPS button on the Extender to perform the configuration process as it is a better way to extend your host network.
Search for the WPS button on your Host Router and press it.
Push the WPS button on the AC1200 Wi-Fi Range Extender within 2 minutes.
Wait for the Signal LED to change solid blue while proceeding how to configure TP-Link Wifi extender.
The blue light indicates that the WPS connection is successful for TP-link Extender Ac1200 Setup.
Repeat the steps to connect the Extender to a dual-band Router.
If your ISP gateway disables the WPS function, then configure it via Web Interface.
Connect your device to the Extended Network to complete TP-link Extender Ac1200 Setup. The passkeys for both the instruments are the same as that of the Host Router.
How to Configure TP-Link AC1750 Wi-fi Extender?
You can configure the TP-Link AC1750 Wi-Fi Extender using the Tether Application.
Initially, press the WPS button on the Router and then the Extender.
A light on the Extender blinks indicating a successful completion of the network connection.
Visit the Play Store on your Smartphone and search for the Tether app.
Download the application on your mobile and install it.
Navigate to Wi-Fi Settings and select the SSID of your Range Extender.
Launch the Tether app and select your Range Extender by following How to Configure TP-Link AC1750 Wi-fi Extender.
Create a Pass-Phrase for the management and the device will scan the wireless network around.
Select between 2.4 or 5GHz or both and enter the Passwords respectively.
The default network name of your Extender and the Host network are the same.
Verify the Settings and tap the Finish button to complete TP-Link Wifi Extender Setup. The Extender will reboot to apply the Settings.
How to Configure TP-Link Archer C9 Wi-fi Extender Name?
The steps mentioned below will explain the procedure to configure the TP-Link Archer C9 Wi-Fi Extender.
Visit the official page of the Extender on your web browser and enter the default Login Credentials.
On the Configuration page, click the Advanced option.
Select the System Tools link and the submenu displays on the screen.
Choose the System Parameters option from the menu and wait until the page loads.
Enable the WDS Bridging option while proceeding How to Configure TP-Link Archer C9 Wi-fi Extender Name.
Click the Survey icon and locate the Host Router's SSID.
Enter the Router's wireless password if you have one.
Navigate to the Settings option and click the DHCP Server.
Disable the DHCP Server option and select the Save button.
Click the Advanced tab and choose Network settings.
Select the LAN option to configure the Extender's IP address with that of the Host Router.
Check if the WDS Status is running from the Wireless Status of the Advanced tab to verify the completion of how to configure TP-Link Wifi extender.