How To Change Router Bandwidth

The bandwidth of a network is shared by all the computers that are connected to it. If anyone of the computers is using a higher bandwidth, it may affect the entire network’s performance. In order to avoid such a situation, you can specify the bandwidth for each computer on the network to ensure uninterrupted data transfer over the network. To know how to change the router bandwidth, refer to the following instructions.

Step 1

  • Step 1:Take an Ethernet cable and plug one of its ends into the router’s LAN port.
  • Step 2:Connect the Ethernet cable’s other end to your computer’s Ethernet port.
  • Step 3:Note: You can even connect your router to the computer wirelessly.

Step 2

Launch a browser on the computer (that is connected to the router).

Step 3

  • Step 1:To change the router bandwidth, you have to access the router’s web-interface page.
  • Step 2:To do this, enter the router’s IP address in the address bar.
  • Step 3:Provide the router’s user name and password in the relevant fields.

Step 4

  • Step 1:Click Login to access the router’s web-interface page.
  • Step 2:The default IP address, user name, and password for some wireless routers are listed below for your reference.

Asus router

  • Step 1:IP address - 192.168.1.1
  • Step 2:User name - admin
  • Step 3:Password - admin

Netgear router

  • Step 1:IP address - 192.168.0.1 or 192.168.1.1
  • Step 2:User name - admin
  • Step 3:Password - password

TP-Link router

  • Step 1:IP address - 192.168.1.1
  • Step 2:User name - admin
  • Step 3:Password - admin

Belkin router

  • Step 1:IP address - 192.168.2.1
  • Step 2:User name - admin
  • Step 3:Password - password

D-Link router

  • Step 1:IP address - 192.168.0.1
  • Step 2:User name - admin
  • Step 3:Password - leave this field blank

Step 5

On the router’s web-interface page, perform the following steps based on your router model.

Asus router

  • Step 1:Navigate to the QoS tab at the top of the screen.
  • Step 2:Click the Adaptive QoS tab in the left panel.
  • Step 3:In the main panel, go to the QoS Type field and select the Bandwidth Limiter option.
  • Step 4:To save this setting, click the Apply option.
  • Step 5:When the Bandwidth Limiter page opens, provide any of these details to set your target.
  • Step 6:Choose your client name.
  • Step 7:Type your IP address.
  • Step 8:Enter the range of your IP address.
  • Step 9:Provide your MAC address.
  • Step 10:Set your bandwidth in the Download Bandwidth and Upload Bandwidth fields.
  • Step 11:Click the Add icon followed by the Apply option to save the changes to the router bandwidth.

Netgear router

  • Step 1:Click the Dynamic DoS option.
  • Step 2:Select the checkbox next to the Enable Dynamic QoS option.
  • Step 3:Set your internet bandwidth.
  • Step 4:If necessary, perform a Speed test to detect your bandwidth.
  • Step 5:To change the router bandwidth setting, select the Apply option.

TP-Link router

  • Step 1:Select the Bandwidth Control option followed by the Control Settings option in the left panel.
  • Step 2:Checkmark the box beside the Enable Bandwidth Control option.
  • Step 3:In the Line Type field, select either the ADSL or Other radio button.
  • Step 4:Specify your bandwidth in the Egress Bandwidth and Ingress Bandwidth fields.
  • Step 5:Click Save to save the bandwidth settings.
  • Step 6:To view the bandwidth rules, select the Bandwidth Control option followed by the Rules List option.
  • Step 7:To add a new bandwidth rule, click the Add New button.
  • Step 8:Select the checkbox next to the Enable option.
  • Step 9:Fill the IP Range, Port Range, Protocol, Egress Bandwidth, and Ingress Bandwidth fields correctly.
  • Step 10:Select the Save option to save the bandwidth rule.

Belkin router

  • Step 1:In the left panel, navigate to Wireless and select the Channel and SSID option.
  • Step 2:Choose your preferred bandwidth from the Bandwidth drop-down menu.
  • Step 3:To update your wireless bandwidth settings, click the Apply Changes button.
  • Step 4:This is how you have to change the router bandwidth for the Belkin router.

D-Link router

  • Step 1:Click the Advanced tab at the top of the screen.
  • Step 2:Select the Advanced Network option in the left panel.
  • Step 3:Go to Traffic Management -> Bandwidth Profiles.
  • Step 4:Check if the Enable Bandwidth Profiles option has been selected.
  • Step 5:Click Add and fill the Name, Policy Type, Profile Type, Priority, Minimum Bandwidth Rate, and Maximum Bandwidth Rate fields.
  • Step 6:Select the Save Settings option to change the router bandwidth.