Easy Steps To Know How To Activate Wps On Sagemcom Router?

WPS (Wireless Protected System) is a method to connect the Wi-Fi devices to the router network without having to enter the network name (SSID) and password. It is used as an alternative to the regular wireless setup method. It is called ‘protected’ because the method works only for protected or encrypted Wi-Fi networks. Carry out the below steps to know how to activate WPS on Sagemcom router.

The different ways to activate a WPS method of the router are

Using WPS PIN

Using WPS 8-digit password

Using the Push-button

The WPS Push button method is the simplest of all. The Sagemcom router uses the WPS Push button and WPS PIN methods to connect devices to it. The WPS feature is turned off on the router by default. So you need to enable it and then proceed with the WPS connection. Read more to know how to activate WPS on the Sagemcom router.

Step-1: Open router’s Web Interface

The web interface allows you to access the router configuration and change the settings.
Connect the computer to the router using a network cable (Ethernet) and open a web browser.

Enter the router login page and log in to the web interface/GUI.

Step-2: Enable WPS

Know how to activate WPS on Sagemcom router now, click the network which you want to configure. If you are connected to the network, it appears at the top beside the Home button.
Select the WPS tab and toggle on the Enable WPS switch.
Below that, you could see the Push Button and PIN checkboxes. Enable both the checkboxes.

Make sure to enable WPS for both the 2.4 GHz and 5 GHz bands. Click Apply to save the settings.
Ensure the Wi-Fi device you are connecting to also has the WPS feature on it.

Step-3: Connect using WPS

Next, press the WPS push button on the router and immediately hold the Push button on your device for 5 seconds.

Release the button when the router and the device are paired. And finally you know how to activate WPS on Sagemcom router.