If you want to access your TP-Link router from inside the network, you can do it by entering the router’s IP address in your web browser. If you want to access the router from outside the network (remotely), you need to type the public IP address and port number configured on your router’s web-based setup page. Scroll down this page to know how to access router remotely TP-Link.
For detailed instructions to access your TP-Link router remotely, keep reading the instructions given below.
First, you have to configure the Remote Management setting on your router.
Make sure to connect your router and computer using a standard Ethernet cable.
On your computer, open the default browser and enter your router’s IP address in the URL field. Press the Enter key to access your router’s login portal.
You can identify the router IP address from your router’s label or using the Command Prompt app on your Windows computer.
To use the Command Prompt app, you need to run it with administrative rights.
Click the Start menu and type ‘cmd’ in the search panel. From the search result, right-click the Command Prompt app and select the Run as administrator option.
In the Command Prompt window, type ‘ipconfig’ and press the Enter key.
Navigate to the Default Gateway section and identify your router’s IP address.
On the router login portal, enter the username and password in the required fields and then click Login to access the web-based setup page.
Click the Security tab and select the Remote Management submenu from the left-side panel.
You can see that the Remote Management function has been disabled with the default setting (port 80 and IP address 0.0.0.0).
To enable this function, you must enter a specific authorized remote IP address in the Remote Management IP Address field.
If necessary, enter the web management port to enhance your security.
Click Save to apply and save the configured settings.
- how to access router remotely TP-Link.You can now remotely access your TP-Link router from a web browser using the created WAN IP address and custom port number. And finally get the steps to know