How To Hooking Up A Belkin Wireless Router To A Cable Modem?
If you have a Belkin wireless router and a cable mode, follow the steps below for hooking up a Belkin wireless router to a cable modem.
- Hooking Up Belkin Wireless Router
Hooking Up Your Belkin Wireless Router To Cable Modem
Confirm that there are no issues with your Internet Service Provider.
First, disconnect both devices from their power source.
You will need a good network or Ethernet cable to connect the router to your modem.
Connect the Ethernet cable to your modem and plug in the other end of the cable to the WAN port on your Belkin router.
Now, you can connect both devices to a power source. First, connect your modem to a power outlet and then connect the router to the power source.
Since you are setting up the router for the first time, you can connect the router and computer using a network cable.
Press the Windows and R buttons together on your Windows computer.
Now, enter cmd and tap Enter.
- ipconfig and hit the Enter key.Type
You can now locate the IP address of the Belkin router in the Default Gateway section.
Open your browser and type the IP address of the Belkin router in the address bar. Tap Enter.
Click Login. When prompted to enter the username and password, type them. Select Submit.
Once you are on the web-based setup page of the router, you can configure the required network settings.
Navigate to the Internet WAN section and choose the connection type. Click on the Next button.
To know the connection type, you can contact your Internet Service Provider.
You can set the wireless connection by entering the network credentials. Choose the preferred security type.
Make sure to save all the settings you have made by clicking on the Apply Changes button.
You can now easily get connected to the network using its SSID and password. If you still have any queries for hooking up a Belkin wireless router to a cable modem, contact our technical experts.