D-Link Dir-650in Wireless N300 Router Setup

D-Link Dir-650in Wireless N300 Router Setup

D-Link DIR-650IN wireless N300 is a high-performance router with wireless speed up to 300Mbps, which helps to share broadband Internet connection with all your devices. This router also has Repeater Mode and allows you to extend the range of the wireless network. Simply connect the modem to the D-Link router and follow the below steps to complete the D-Link Dir-650in Wireless N300 Router Setup process.

Box Content:

  • D-Link DIR-650IN wireless N300 router.
  • Ethernet Cable.
  • Power Adapter.
  • Quick Installation Guide.

Steps To Setup D-link Dir-650in Wireless N300 Router:

  • Open the box and take the router and all the box contents.
  • Place the router on a plane surface and raise all four antennas upward.
  • Now turn OFF your modem and connect one end of the Ethernet to the modem’s LAN port; connect the other end to the router’s WAN port.
  • Next, connect one end of another Ethernet cable to the router’s LAN port and your laptop or computer’s LAN port.
  • Turn ON the modem.
  • Connect the adapter pin to the router’s rear end and connect the adapter to the electrical socket. Wait for few seconds and turn ON the computer or laptop.
D-Link Wireless Dir-650in N300 Router Setup

Step To Configure The D-link Dir-650in Wireless N300 Router Setup:

For Windows:

  • Turn ON the computer, open the default browser, enter the router’s IP address in the address bar, and press Enter (The IP address is mentioned on the router’s backside).
  • On the next page, enter the User Name and Password in the required fields (the User Name and Password are mentioned on the router’s backside).
Setup D-Link Wireless Dir-650in N300 Router
  • Once you log in, select the radio button for the D-Link Router.
  • Below the Router Settings, to create a new network, enter a new Network Name and Pre-Shared Key in the required fields.
  • Now, to set the Connection Type, select any one of the radio buttons depending on your Internet connection type.
D-Link Dir-650in Wireless N300 Mbps Router Setup
  • Enter the Internet Service provider’s User Name and Password that comes with your modem and click Save & Apply.
  • Wait few seconds and do not turn off your computer.
  • Now search the available Wi-Fi network from the Wi-Fi settings and select the network you have created; enter the password.

Now your D-Link DIR-650IN wireless N300 router setup is completed, and you are ready to use the wireless router.