Configure Belkin Router Without Cd

You can set up and install the Belkin router by using an installation disc or download the firmware from the router’s web-based setup page.Proceed with the steps given below to configure Belkin router without CD.

Configure Belkin Router Without Cd

Step 1: Preparing your internet modem for connection

Make sure that you have a fast internet connection to set up the Belkin router without the installation CD.

Connect the modem to your computer directly using an Ethernet cable without connecting the Belkin router.

Ensure that your modem is connected to a power source to configure Belkin router without CD.

If you can access the internet, unplug the power cable from the modem.

Step 2: Connecting router and modem

Plug in an Ethernet cable to the WAN port of the Belkin router.
Connect the Ethernet cable’s other end to your modem.
Now, plug an Ethernet cable into the LAN port of the Belkin router and connect the other end to your computer.
The LED light on the router will blink and turn solid blue.
If your router LED light does not turn blue and is constantly blinking in Amber, check whether you have made the connection properly.
If you still face the issue, power cycle the modem and turn it on after some time.

Step 3: Configure the Belkin router

Go to your browser and enter the IP address of the router.
You can also go to the official Belkin website.
Select the Detect my connection option and start to check for the firmware update.
After the connection is established, update the firmware.
Enter the default network credentials available on the bottom of your Belkin router setup.
If required, change the network credentials. Choose the WPA2 encryption for more security.
Click the Save and Continue button to save the newly changed network credentials.
Register the Belkin router by following the instructions on the screen to configure Belkin router without CD.