Guidance For Comcast Ipv6 Router Setup

Comcast Ipv6 Router Setup

IPv6 is a protocol that provides a pool of nearly unlimited IP addresses. You can configure the IPV6 feature on your Comcast router easily and quickly. To know about Comcast Ipv6 router setup, follow the instructions given below.

In order to get the process done, you have to perform the two major steps.

  • Physical connection
  • Configuration over a web access page

Physical connection:

  • Place the modem, wireless router, and your computer closer to each other.
  • Now, power off your modem if it is turned ON.
  • Using an Ethernet cable, connect your Comcast wireless router to the modem.
  • Make sure to connect the Ethernet cable to the WAN port of the router.
  • Using another Ethernet cable, connect your computer to the router.
  • Now, turn on the modem, wireless router, and your computer.
  • Once the connection is established, check if you could access the internet.
  • Follow these steps to configure the Comcast Ipv6 router setup.

Set up over a web access page

  • Now, on your computer, open the Google Chrome web browser.
  • Type your router’s IP address in the address bar and press Enter.
  • Enter your router’s credentials in the router’s web interface login page.
  • Once you reach your router’s web access page, click the IPv6 tab.
  • By default, the IPv6 option will be enabled.
  • If it is disabled, enable it.
  • Now, navigate to the Internet Connection Type section and select the Dynamic IP option from the drop-down menu.
  • Click the down arrow icon beside the Advanced option.
  • Now, a list of options will appear.
  • Set the Get IPv6 Address option to Auto.
  • Make sure to turn on the Prefix Delegation option by clicking the radio button beside the Enable option.
  • Click the Save button.
  • Now, check if there is an IPv6 internet connection.
  • If not, restart your modem, wireless router, and the computer.
  • Now check if an IPv6 address has been assigned to your computer.

If you having any further queries regarding on Comcast Ipv6 router setup. Click the call button available on the screen.