Follow these guidelines to set up the Centurylink router.
Set the Centurylink router on a flat surface. Connect the phone cable to their respective wall outlet and port on the router. Attach the Centurylink router to the power outlet by using the supplied power cable. Connect the yellow Ethernet port on the Centurylink router and the computer by using the Ethernet cable. Enter the Centurylink router passphrase and username on the computer after selecting the router’s Wi-Fi SSID from the Wi-Fi SSID list. Now the centurylink router setup is done.
Here are the detailed guidelines to set up the Centurylink Wi-Fi router.
Check whether you have the Centurylink Wi-Fi router, Ethernet cable, phone cable, and the Centurylink router power cable before proceeding with these steps.
Connect the Centurylink router and the wall Ethernet port by using the Ethernet cable.
Make sure you keep the Centurylink router in a location where the air circulation is good as the router shouldn’t get too hot or cold. Remove any device that might cause radio interference, which is kept close to the Centurylink router.
Connect the Centurylink router’s power cable to its power port and the wall power outlet. Wait until the power LED turns green before going to the next step of how to setup centurylink wi-fi router guide.
Attach the Centurylink router’s phone cable to its phone port and the wall phone jack. Make sure you connect the phone cable to the DSL port on the Centurylink router.
Now, wait for a couple of minutes until the green DSL LED glows steadily.
Take the Ethernet cable that was supplied with the Centurylink router and connect it to the computer. Connect its other end to the Ethernet port on the Centurylink router setup.
If you need to connect the Centurylink router to the computer wirelessly, look for the Wi-Fi SSID and password on the router. Use these Centurylink router credentials to log into the router’s Wi-Fi SSID and connect to the internet.
CENTURYLINK ROUTER SETTINGS
Here are the guidelines to change the Centurylink router settings.
Type the Centurylink router’s IP address on the address bar of your computer’s internet browser and press Enter. The default Centurylink router is 192.168.0.1.
Navigate to the Advanced Setup option and click it.
Choose WAN Settings. Make the required changes to DNS type, enter the DNS addresses, and click Apply.
Go to the Centurylink router’s status page and check whether these settings have changed.
CENTURYLINK ROUTER LOGIN
To log into the Centurylink router web setup page, open its EWS page, and enter the credentials by following the how to setup centurylink wi-fi router guidelines mentioned above to setup router.
The default Centurylink router IP address is 192.168.0.1. Check the label on the Centurylink router setup to see the username and passphrase data. Make a note of them.
Type the Centurylink router’s IP address in the web address field on your computer’s web browser and press Enter.
Enter the Centurylink router username and password to login to the EWS page and make changes to the router settings.
RENAME CENTURYLINK ROUTER
First, connect the router and a device of your choice.
Launch a frequently used browser and key in the IP Address of the Centurylink router in the address bar. The default IP address of the centurylink router setup is 192.168.0.1.
Enter the Administrator User and Password in the respective fields. Tap the Apply button.
Go to the Wireless Setup menu and choose the 2.4GHz option. Click on the Wireless Security option.
From the list of SSIDs displayed, select the SSID that you want to edit.
Next, you have to choose the Security Type as per your choice. Tap the Both option under Encoding.
Tap the Apply button to save the modified name.
CENTURYLINK ROUTER DEFAULT PASSWORD
The default password of the Centurylink router can be found using two methods.
First, turn the router to its backside and check the white label that is stuck there for the username and password of the Centurylink router.
Else, check the documentation that came along with the router for the default password.
It will be printed in the documentation. Make a note of it and use it to enter the web management page.
HOW TO CHANGE CENTURYLINK ROUTER PASSWORD
After you setup the router using how to setup centurylink wi-fi router guide, Make sure a device is connected to the modem before proceeding to change centurylink router password.
Key in 192.168.0.1 in the search bar and tap the Enter button.
Specify the router’s username and password in the respective field.
Select the Wireless Setup menu followed by the SSID Setup option to change centurylink router password.
Choose the SSID you wish to edit and navigate to the password field.
Specify a new password of your choice and make sure it satisfies the strong password criteria.
Tap the Apply button and save the changes you made to change centurylink router password.
HOW TO RESET CENTURYLINK ROUTER
Find the reset button that is available at the back of the router.
Press the Reset button and hold it for at least 15 seconds to reset centurylink router.
Wait patiently till the Internet light turns to green color.
Once the reset process is complete, you have to configure your Centurylink router setup and then connect any devices to it.
HOW TO UPDATE CENTURYLINK ROUTER
Do the steps below to change the default password of the centurylink router.
To update the firmware, you have to log into the web management page of Centurylink router.
In the Login window, enter the correct username and password in the respective fields.
Tap the Log In button, and you will be directed to the web utility page of the router to update centurylink router.
Select the Utilities option followed the Upgrade Firmware option.
If the Firmware is Up To Date message appears, then you don't have to update centurylink router firmware.
In case the Upgrade Firmware option is displayed, you have to download and install the firmware for centurylink router setup.
Click the Download button available on the next screen.
Go to the drop-down menu present near the Save option and choose the Save As option from the list.
Choose the Desktop option and tap the Save button to update centurylink router.
Next, click the Browse button followed by the Desktop option.
Select the Firmware file. Click the Update Firmware option.
Once the process completes, you will be directed to the Log in screen.
HOW TO REMOVE DEVICES FROM ROUTER CENTURYLINK
Launch the default browser on your computer and key in the IP address of the Centurylink router in the search bar to remove devices from router centurylink.
Next, key in the administrator username and password in the correct text boxes. Click the Sign In button.
Choose the Advanced Setup menu and then select the DHCP Reservation option on centurylink router setup.
Next, you have to disable the DHCP Reservation Status. Tap Apply to modify the changes you have made to remove devices from router centurylink.
Remove any devices that you want from the list available at the bottom of the screen.
You have now successfully removed the devices from the Centurylink router.
CENTURYLINK ROUTER NOT WORKING
Is solve centurylink router not working, perform the instructions given below.
Check if proper internet connection is being provided to the Centurylink router setup.
If so using how to setup centurylink wi-fi router guide, you have to wait till the error is rectified and then you can start using the router.
Unplug the Centurylink router from power supply and wait for a few seconds.
Connect it again after a few seconds and check if the issue has been resolved. Restart the router and examine if the problem has been sorted out.
Else, reset the router to its default values to solve the issue.
Find the Reset button available at the back of the router and press it. Hold it for a few seconds.
Once you release it, the router will take 3-5 minutes to restore the settings to the default values.
Get support from our techies if the issue persists on centurylink router setup.