Can't Connect To Belkin Router
If you can't connect to Belkin router, follow the below-mentioned troubleshooting steps.
- Unable To Connect Belkin Router
Unable To Connect Belkin Router
First, check the hardware connections on the Belkin router.
Power cycle your Belkin router by unplugging the power cable and reconnecting it after thirty seconds.
Check if the Internet connection from the ISP is standard.
If you are connecting the Belkin router to a Windows computer, use a standard Ethernet cable.
After establishing the connection between them, open the default browser on your Windows and type the Belkin router's IP address in the URL.
On the Belkin router's web page, enter the username and password, and click Login.
- Belkin router setup.
The default username and password are available on the label located at the backside of the
If you aren't able to use the wireless network, check the firmware version of your Belkin router.
If you are using an outdated firmware version, download and install the latest firmware version from the official Belkin site.
If the can't connect to Belkin router problem persists, click the Start menu and type "cmd" in the search panel.
Click the Command Prompt application and select the Run as Administrator option.
Type the command "netsh int ip reset c:\resetlog.txt" in the Command Prompt window and press the Enter key.
Restart the Windows computer if prompted on the Command Prompt window.
Check the Wi-Fi Security Settings as well as Wireless Broadcast Settings for your Belkin router to solve can't connect to Belkin router.
- Network and Internet --> Network & Sharing Center.On the Windows desktop, open the Control Panel and select
Click the name of the connection near Connections.
Click the Properties button at the bottom-left corner of the window to solve unable to connect Belkin router.
Choose Internet Protocol Version 4(TCP/IPv4) and click the Properties button.
Make sure to select the "Use the following DNS server addresses" radio button.
Enter 22.214.171.124 for the Preferred DNS server and 126.96.36.199 for the Alternate DNS server.
Click the OK button and close the Control Panel window.
Now, check if you could access the Belkin router from your computer.
If the can't connect to Belkin router problem remains unsolved, contact our technical experts by clicking the Call button available on this screen.