Steps To Do Buffalo Airstation Highpower N600 DD-WRT Router Setup

Buffalo Airstation Highpower N600 DD-WRT Router Setup

The Buffalo Airstation HighPower N600 Gigabit Dual Band DD-WRT router offers exceptional Wi-Fi range and performance. It is perfect for streaming movies and it comes with pre-installed DD-WRT. The key features are Wireless Security, Gigabit WAN & LAN, Dual Band, Highpower Technology, Backward Compatibility, Wireless Bridge, and USB 2.0 Accessory Port. The steps to perform the Buffalo Airstation HighPower N600 DD-WRT router setup are provided on this page.

Buffalo Airstation N600 Setup For A Computer

Step 1

  • Connect your modem’s power cord to an electrical outlet. Use a coaxial cable for establishing the connection between the modem and wall outlet.
  • Plug your Buffalo router’s power cable into an electrical outlet. Use an Ethernet cable for establishing a connection between the router’s WAN port and the modem’s rear port.

Step 2

  • Turn on the Wi-Fi feature on your computer.
  • Select the router’s network name and enter the password.
  • Note: You can get the wireless network information from the setup card (that is included with the router).

Step 3

  • Open the Internet Explorer browser or any other browser on your computer.
  • To access the router’s page, enter the default IP address (192.168.11.1) in the address bar.

Step 4

  • When the Windows Security prompt dialog box appears, type admin in the User Name field.
  • Enter the password in the Password field and then click OK.

Step 5

  • It checks for the internet connection and you will see the Checking for Internet message on the screen.
  • Once the Your Internet connection was successfully enabled message appears, click the Next button.

Step 6

  • Type a new network name for the router in the SSID (Network Name) field.
  • In the Encryption Key (Password) field, set a new network key.
  • Click Apply to continue.

Step 7

  • The entered wireless network information appears on the screen.
  • Check if they are correct and then click the Done option.

Step 8

  • Set new router login details in the Username and Password fields.
  • Enter your password in the Password (Confirm) field for confirmation.
  • Click Done in the User Account window.

Step 9

  • When prompted, enter the new login details to access the router’s web interface page.
  • Use the new SSID and network key for connecting the router to the computer.
  • Now, you can access the internet. Proceed with the below section to perform Buffalo Airstation Highpower N600 DD-WRT router setup for portable device.

Buffalo Airstation N600 Setup For Portable Device

Step 1

  • Turn on the Buffalo Airstation N600 DD-WRT router and your modem.
  • Establish a connection between the router and the modem using an Ethernet cable.

Step 2

  • On your smartphone, enable the Wi-Fi feature.
  • Use the default SSID and network key for establishing a connection between the router and smartphone.

Step 3

  • Open any browser application on the smartphone.
  • In the Authentication Required window, provide the router login details and tap Log In.

Step 4

  • Wait until you see the Your Internet Connection was successfully established message.

Step 5

  • Set a new network name and key in the SSID (Network Name) and Encryption Key (Password) fields.
  • Tap Apply -> Done.

Step 6

  • Create a new router login information and then tap the Done option.

Step 7

When prompted, enter the new login details in the appropriate fields and tap Log in.

Step 8

  • Connect the smartphone to the router using the newly created SSID and key.
  • Once you complete the Buffalo Airstation HighPower N600 DD-WRT router setup, you can browse the internet.