How to Block Netgear Router Internet
The Netgear router can be configured to block certain domain names for security purposes. To block a domain name on a Netgear router, log into the Netgear router’s EWS page, navigate to Advanced and enter the domain names in the domain name field. Now, choose a keyword blocking option and then save these settings by clicking Apply to Settings Block Sites,block Netgear router internet.
Netgear Router Block IP
Here are the guidelines to block specific IP addresses on a Netgear router.
Connect the Netgear router and computer with an Ethernet cable. You can connect this Ethernet cable to any Ethernet port on the Netgear router.
Now, access the 10.0.0.2, 10.0.0.1, or 10.0.0.0 website on your computer’s web browser. Type one of these web addresses and then press Enter.
Key in the Netgear router's username and password. Usually, the Netgear router's username and password are admin and password, respectively.
- Netgear router block IP.
Navigate to the 'Advanced' tab and locate the Static Routes option for
Click Add. Enter these static route details. (You do not have to type the quotes.)
Type 'insert the desired route name' in the Router Name field. Enter '188.8.131.52' in the Destination IP address field. Enter '255.255.255.255' in the Netmask field.
Type 'your router's IP address, i.e., 10.0.0.1 for example' in the Gateway field. Enter '2' in the Metric field. Click Apply.
If you need to add more IPs to block, repeat the step mentioned above for those IPs for Netgear router block IP.
Open Command Prompt on your Windows computer and type these commands without quotes. Press Enter after typing these commands.
In this way, type all the IPs which you blocked for block Netgear router IP.
You should be able to see a message on the screen stating that the connection timed out or the destination host was unreachable. This means that the IPs have been blocked successfully.
Power off the Netgear router and detach its power cable. Wait for about half a minute before attaching the Netgear router's power cable and powering the device on.
Block Facebook on Netgear Router
Here are the guidelines to block Facebook on a Netgear router.
Make sure that the Netgear router is connected to the computer with an Ethernet cable before proceeding with these steps to block facebook on Netgear router.
Navigate to the webpage 'http://www.routerlogin.net' or 'Netgear router's IP address' on your web browser.
Type the Netgear router's username and password. (These details are found on the Netgear router's label.)
Click Log In. In case the label is torn, try using admin and password as the Netgear router's login credentials.
Locate the Advanced tab at the top and click it. Choose Security and then click Block Sites to block Netgear router to connect it to facebook.
Click Never, Per Schedule, or Always in the Keyword Blocking section according to your preference.
Enter the domain name in the 'Type keyword or domain name here' field. In this case, type 'http://www.facebook.com' without quotes. Enter additional sites' domain names here if required.
Click Apply to block facebook on Netgear router.
Block Sites on Netgear Router
Here are the Netgear router site-blocking guidelines.
Open the Netgear router's EWS page on your web browser. Find the Netgear router's IP address on the device's label. Typically it is '192.168.1.1' without quotes. After typing this address in your browser's address bar, press Enter to block sites on Netgear router.
Type your Netgear router's username and password. If you have not changed these details, they should be 'admin' and 'password.' Click Log In.
- netgear router Setup. Click it.
Navigate to the 'Advanced' tab and locate the Security option beside
Click Block Sites. Choose one of the three Keyword Blocking options according to your preference. Enter the domain names of the sites to be blocked. Click Add Keyword. Click Apply to block sites on Netgear router.
Block Youtube on Netgear Router
Visit the Netgear router login page.
Enter ‘admin’ in the Username field and then enter ‘password’ in the Password field.
Now, you will see the Netgear router main page to block youtube on Netgear router.
- Select Advanced Security Parental Controls on the left panel of the screen.
Select the Blacklist/Whitelist tab and then select Youtube from the Your Blacklist section.
How to Block Devices on Netgear Router
Sign into the Netgear router account using the default credentials.
Click the Advanced tab at the top-right corner of the screen to block devices on Netgear router.
- Click Security Access Control on the left panel of the screen.
- ‘Allow all new devices to connect’ option to block Netgear router to connect devices.
Tick the box beside the
Select the device that you want to add in the block list and then click the Block button.
Select the Apply button at the top-right corner of the screen to save the changes.
Block Internet Access Netgear Router
First, you have to establish a network connection between the Netgear router and the computer using a wireless router.
On your Windows computer, double-click the Google Chrome icon to launch.
Type either 192.168.1.1 or 10.0.0.1 in the address bar and tap the Enter key to view the Netgear login page to block internet access Netgear router.
- reset your Netgear router to restore the factory default settings.
Type the username and password in the appropriate fields. If you are not able to log into the Netgear account,
- Select the Advanced tab and then click Security Block Services.
Select either the Per Schedule or Always option as per your wish.
Select the Add button and then select the User Defined option from the Service Type drop-down menu to block internet access Netgear router.
Also, select the TCP/UDP option from the Protocol drop-down list.
Navigate to the Filter Services For section and make sure to specify the range of the IP address in the IP Address Range field.
Select the Add button at the bottom of the screen to save the settings to block Netgear router internet access.