Fix Belkin Router Keeps Dropping Connection issue
- Belkin Router Keeps Dropping
Belkin Router Keeps Dropping Connection
People today are more reliant on Wi-Fi routers than any other electronic device. They look for a router that can deliver high-quality speeds and also brings out an excellent performance. Belkin routers are one of those devices that can fulfill that you require of a router. The Belkin routers give out a good Wi-Fi speed, unique coverage area, better wireless standards, and also offer better security features.
If you are wondering why to choose Belkin router over other routers, read the points below:
The wireless speed of a Belkin router ranges from 300 Mbps, 600 Mbps, 1200 Mbps, 1900 Mbps, and so on.
It covers a broader range to help in connecting other wireless devices. You will not need the use of a Wi-Fi extender.
The Belkin routers give out the best security WPA/ WPA2 that is available in most of the top-end routers with firewall protection.
However, not all electronic devices are perfect and without any problems. When you have a Belkin router, you will realize you will have a frequent drops in connection. The connection error can be a result of a damaged cable or any internal software problems.
Let us go through some of the troubleshooting techniques to resolve the Belkin Router Keeps Dropping Connection
Configure the wireless settings:
Open the default browser on your computer.
Enter the router IP address in the address bar and press the Enter button.
You will now be prompted to enter the login credentials of the Belkin router (the default login credentials are present at the back end of the router).
The default login credentials are:
- Username- admin
- Password- admin/ password
Once you log in to the Belkin router page, you can make the necessary changes to resolve the connection error.
- Reset the router settings and perform a factory reset.
Change the network name and the password, save changes, and restart the router to see if the Belkin Router Keeps Dropping Connection issue is resolved.
Change the security type to WPA or WPA2, and it will bring out a stable connection to your wireless router.
Log in to the router page, enter the router IP in the address bar, and log in to the Belkin router page.
- WPA/ WPA2 –Personal (PSK)
Click the Security option from the left pane, and from the security mode drop-down list, select
Enter a pre-shared key in the field and click the Apply changes button.
Press and hold the reset button located in the Belkin router for at least 30 seconds; the router LED will start blinking and will be reset to factory settings.
Log in to the router page from the browser and set the router from scratch.
LOW SIGNAL QUALITY:
The placement of the router can always be an issue when it comes to router dropping signals. Make sure to place the router at the center of your home, avoid areas next to walls or glass objects that could block the signals.
Keep the router away from electronic devices like microwaves, TV, and radio because the signals can be interrupted and disturbed.
Keep the Belkin router closer to the computer to achieve full connection.
You will see the full connection achieved when you see the Wi-Fi bars full.
Interference with other wireless devices can cause a huge conflict.
The devices that are using the same frequency can come in interference with the Belkin router signals.
- baby monitor, radio, microwaves away from the Belkin router to achieve a proper signal status on your wireless device.
Make sure to keep devices such as
You can either relocate your router or change the wireless channel on the router settings page.
To change the wireless channel in the router, follow the steps given below.
- address bar and press the enter button.
Enter the router IP address in the
Enter the default login credentials to make changes to the Belkin router settings.
The Belkin page will open, click Wireless and select Channel and
From the wireless channel drop-down list, select the channel 1-13 and click the Apply Changes button.
When you face sudden power interruptions, it can also cause the Belkin router to drop signals.
When you get the power back on, turn off the power source of the router, unplug the router, and wait for at least 10 seconds before turning it back on.
You have two options to resolve:
Reset the router configuration-
Log in to the Belkin router page, enter the router IP address.
The Belkin router page will open, click the Utilities option and select Restore factory defaults option.
- Restore Defaults button.
The Belkin router will be reset. Set up the router from the beginning.
Upgrade router firmware-
Enter the router IP address in the address bar.
- (Located at the back of the router)
Enter the default router login credentials.
When the Belkin router page opens, click the Utilities option and select Firmware update.
- OK button if there are any upgrades.
Click the OK button when the prompt says not to turn off or reboot your computer once the firmware upgrade is over.
Once the upgrade is complete, wait for a few seconds and then reboot the computer.
Follow the methods as given above, and surely one of the methods will help you to resolve Belkin Router Keeps Dropping Connection issue.