How To Fix AT&T Uverse Router Wifi Problems?

AT&T Uverse Router Wifi Problems

Troubleshooting the AT&T Uverse router Wifi problems is quite simple if you follow the quick steps given on this page. Usually, the router’s issues can be resolved by merely restarting it. If you are getting Wi-Fi problems even after restarting your router, follow the below-mentioned troubleshooting steps.

Case 1: Wi-Fi Issues

  • If you are facing Wi-Fi issues on your AT&T U-verse router, unplug the power cord from the router.
  • Disconnect the Ethernet cable connected to the router from the modem.
  • Wait for 30 seconds.
  • Reconnect the Ethernet cable and power cord to the router.
  • Power up the router and check if the Wi-Fi light glows solid green or white.

Case 2: Connection Issues On Your Windows Computer

  • Check whether you have properly connected the router to your computer using the correct Wi-Fi credentials.
  • On your computer, click the Network icon on the system tray and select the Network and Internet settings option.
  • Click the Change adapter settings button and give a right-click on your Wi-Fi adapter.
  • Select the Wi-Fi Status option and check the signal strength.
  • Click the Wireless Properties button and check the network protocol.
  • If necessary, disconnect and reconnect Wi-Fi.

Case 3: Above Methods Had Failed

  • Resetting your AT&T U-verse router should be the last option to fix the Wi-Fi problems.
  • If you perform the factory reset, the configured wireless network settings will be restored to factory defaults.
  • To reset your AT&T U-verse router, you have to locate the Reset button first.
  • Next, press the Reset button and hold it for at least 10 seconds.
  • You can use a paper clip to press the Reset button.
  • When the router is restored to factory defaults, you can notice the router restart automatically by flashing all the LEDs.
  • Once reset, you have to configure the router settings once again to completly resolve AT&T Uverse router Wifi problems.