SIMPLE ARRIS ROUTER SETUP GUIDE

For Arris router setup, first, you need to unbox it and check if the package contains all the components essential for the setup. Connect the router and the wireless modem using an Ethernet cable. Similarly, connect the router and the system using the Ethernet cable. Go to the official site of the Arris router, log in, and perform the required basic setup.

HOW TO SETUP ARRIS ROUTER

To set up the Arris router, follow the instructions given below.
Before you begin the Arris router setup, check and make sure that the Arris router is unboxed successfully.
You also need two Ethernet cables, DSL, or satellite internet service to perform the process using how to setup arris router guide.
Unplug the power cord from your wireless modem and wait for 30 seconds.
After that, re-plug the power cord and wait for the re-registration process of your Internet service to complete.
Now, turn on your Arris router by connecting it to the power source using the power cord attached to your router.

Once green lamp glows on the front panel of the Arris router, connect the router to the wireless modem using the Ethernet cable.
Now, verify your network connectivity using any one of the devices.
Connect the system to your Arris router using the Ethernet cable and check the connectivity by opening a web browser.
Go to the official site of the Arris router, enter the required credentials, and click the Login button.
Configure the required router settings in the Basic Setup field and click the OK button.
Once the Arris router setup process is done, start using your Arris router.

ARRIS ROUTER LOGIN

To log into the Arris router, follow the instructions given below.

Connect your computer or hand-held device to the Arris wireless network.
After that, launch a web browser on your system and type the IP address (192.168.0.1) in the search area.
Enter the username and password of your Arris router in the given field when prompted.
Usually, the default username and password of the Arris router is admin and password, respectively.
If you have changed the default username and password of the router, then enter the ones that you have created and click the Login button.
Now you are logged into the Arris router.
If you are not able to log into the Arris router setup, then reset your router to the factory defaults using how to reset arris router steps.

ARRIS ROUTER DEFAULT PASSWORD

The admin and password are respectively the default username and password of the Arris router.
Based on the default gateway, there is a chance for the change of the username and password of the router.
To know the username and password for different models of the Arris router, check out the tabulation given below:

Username	Password
admin	password
admin	admin
admin	blank
admin	1234
blank	blank

HOW DO I FIND MY ARRIS ROUTER PASSWORD

There are two methods to find Arris router password.
If you are using the default password, then you can find it on the backside of the router.
In case you have modified the default password, then make use of the second method specified below to find the password.
Go to the taskbar on your computer desktop and find the Wi-Fi icon. Give a right-click on the Wi-Fi icon.
Select the Property option from the drop-down list, and a window will launch.
Search for the Network Security option and then choose the Show Characters option to display the security key of your router.

CHANGE ARRIS ROUTER PASSWORD

Initially setup your arris router using how to setup arris router guide, open the default web browser and key in the IP Address of the Arris router in the search bar to change arris router password.
Click the Wireless tab available near the Arris Status Box. You will be asked to specify your correct Username and Password in the next screen of Arris router setup.
Click Apply after entering the required credentials. Make sure to specify them correctly.
Go to Security Settings and find the Pre-shared key option. Clear the characters present in that field to change arris router password.
Key in the desired password in that field and save the settings.
Next, shut down your computer and reboot the modem to change arris router password.
After a few minutes, turn on your modem and computer. Check if you are able to connect to the network using the new password.

HOW TO RESET ARRIS ROUTER

First, check if the Arris router setup is turned on and connected properly to a power source.
The Arris router should not be switched off during the reset process using how to reset arris router steps.
Turn the Arris router to the backside and search for the Reset button.
Take a paperclip and straighten it out. Use the paperclip you straightened to press the Reset button and hold it.
Release the Reset button after 15 seconds, and the reset process will begin after following how to reset arris router guide.
Setup the router again using how to setup arris router guide and start connecting your devices to it.

SETTING UP VPN ON ARRIS ROUTER

For setting up vpn on arris router, you have to enable PPTP and L2TP first.
The steps for enabling both PPTP and L2TP are the same except that you have to choose the PPTP or L2TP option in the first step.
Before enabling them setup your asus router using how to setup arris router guide and then, switch the connection type from PPTP to WAN to setting up vpn on arris router.
Next, enable the PPTP or L2TP option. The below-mentioned steps are same for both PPTP and L2TP.
Specify the VPN credentials in the respective fields provided for setting up vpn on arris router.
The proceeding step is to key in the VPN Server address. Next, insert My Internet IP.
The My IP Address field and My Subnet Mask field should be left blank.
Next, enable the Idle Timeout option and set the value to 300.
You have to enable the Keep-Alive option also. Its value should be set to 30.
Once you carry out the steps for both PPTP and L2TP, then the VPN will be set successfully for your Arris router setup.

HOW TO CHANGE CHANNEL ON ARRIS ROUTER

Follow these guidelines to change the channel on an Arris router.

Navigate to the address bar on your computer’s web browser and type the address, ‘192.168.0.1’ without quotes. Press Enter. Setup your arris router by using how to setup arris router guide.

So how to change channel on arris router. The Arris router login screen opens. Type the word ‘admin’ in the Username field and ‘motorola’ in the Password field.

Then, click the Login button. When you see the Status page, navigate to the Wireless button located on the top of the screen.

The 802.11 Radio screen displays. Find the Control Channel drop-down button and click it. Select an option to change the default channel data while following how to change channel on arris router process. Change it to 6 or 11, whichever is not the default value.

This is because the channels 6,1, and 11 do not overlap and deliver better Wi-Fi performance.

HOW TO CHANGE WI-FI NAME ARRIS ROUTER

These are the guidelines for how to change Wi-Fi name Arris router.

Go to the computer which is connected to the Arris router.
Type the address, ‘192.168.0.1’ in the address bar of your web browser and press Enter.
Key in the word ‘admin’ as the username and ‘password’ as the password. Then, click Login.
Navigate to the Wi-Fi 2.4 GHz and the 5 GHz sections. Edit the Wi-Fi SSID in those sections and change the Pre-Shared key for the password as well. Click Apply.
Connect to the Wi-Fi SSID that you created from a mobile device or computer.

HOW TO TURN OFF WPS ON ARRIS ROUTER

Here are the guidelines for how to turn off WPS on Arris router setup.

Power on the computer which is connected to the Arris router.
Type the address, ‘192.168.0.1’ without quotes in the address bar of your computer’s internet browser and press Enter.
Key in the Arris router login details and log into your Arris router.
Navigate to the connection screen and then choose Wi-Fi.
Select the ‘Add Wi-Fi protected Setup client’option.
Use the WPS toggle button on the screen to turn WPS off.

HOW TO CONNECT WI-FI ROUTER TO ARRIS MODEM

You can follow these guidelines to connect the Arris modem to your Wi-Fi router

Disconnect the Ethernet cable connected to your Arris modem from the computer’s Ethernet port. Detach the modem’s power cable from the wall outlet.
Take the end of the Ethernet cable that was previously connected to the computer’s Ethernet port and connect it to the port labeled ‘Internet’ on your router.
Switch on the Arris modem and your router after plugging their power cables into the power outlets.
Go to the 'Start menu' on your computer and open Control Panel. Choose the Network & Sharing option and click on ‘Set up a new home network.’
The network connection wizard locates the router. Double-click to select it, and then generate a passphrase for your Wi-Fi network. Type a new name for your home network when you see the corresponding prompt on the screen.

ARRIS ROUTER PORT FORWARDING NOT WORKING

Do the following procedure to rectify the Arris router port forwarding not working issue.

Make sure to configure the correct port and also, verify the IP address of the server is correct in the list.
Enter the port number and click the Check button to ensure that your port is responding to the Internet.
Configure the server with the correct default gateway to solve Arris router port forwarding not working.
Check that you have entered the correct IP address to make a connection to the server.
The default gateway and the LAN IP address should be the same to solve Arris router port forwarding not working.
Check the firewall settings in the Arris router.
If you are not able to resolve the issue, contact our technical experts to rectify the problem.

FORGOT ARRIS ROUTER PASSWORD

Proceed with the following steps to reset the password when you forgot Arris router password.

Turn on your Arris router.
Locate the Reset button on your printer to solve forgot Arris router password.
Use a paper clip to press the Reset button.
Hold the Reset button till the lamp on the router flashes.
Once you complete the router reset, open the default browser extension.
Enter the default IP address of the Arris router setup and type the default user name and password. The default user name and password is admin.
Now, you can change the user name and password as per your wish.

ARRIS ROUTER NOT WORKING

Follow the instructions below to fix the Arris network connectivity issue.

Open the default browser and enter the IP address of the router to solve Arris router not working problem.
Enter the default user name and password as admin.
Make sure to have a strong network connection.
Change the SSID and network key (password). Click the Save Settings option at the bottom of the screen.
Log out from your account to fix Arris router not working issue.
After a few minutes, use the new password or network key to activate network connection on your Arris router setup.